Raspberry Pi Zero UI HAT V1
author: dewhisna
2 layer board of 2.57 x 1.19 inches (65.2 x 30.2 mm)
Uploaded:
October 03, 2017
Shared:
November 11, 2017
Total Price:
$15.20
User-Interface HAT for the Raspberry Pi Zero. Note: Attaches to the BOTTOM of the Raspberry Pi Zero Board!
This HAT provides a debounced 6-button keypad interface and three I2C OLED connectors for mounting the little off-the-shelf 128x64 OLED displays readily available as either a single screen centered on the board, or two screens side-by-side.
It also has a connector for Serial I/O for debugging, plus a Real-Time Clock (RTC) module connector that works with the off-the-shelf DS3231 RTC modules.
Though I guess technically not a “HAT” since it doesn’t have the ID EEPROM. But it was eliminated because this board was designed to be used with another HAT board installed at the same time.
User-Interface HAT for the Raspberry Pi Zero. Note: Attaches to the BOTTOM of the Raspberry Pi Zero Board!
This HAT provides a debounced 6-button keypad interface and three I2C OLED connectors for mounting the little off-the-shelf 128x64 OLED displays readily available as either a single screen centered on the board, or two screens side-by-side.
It also has a connector for Serial I/O for debugging, plus a Real-Time Clock (RTC) module connector that works with the off-the-shelf DS3231 RTC modules.
Though I guess technically not a “HAT” since it doesn’t have the ID EEPROM. But it was eliminated because this board was designed to be used with another HAT board installed at the same time.
