Shared Projects

Shared Projects

HV_Sw_Box_Board_rev00

author: hvdave2000
Top
Bottom

2 layer board of 8.00 x 6.00 inches (203.3 x 152.5 mm)
Uploaded: July 30, 2025
Shared: July 30, 2025
Total Price: $240.25

HV switch box board, rev 00

HV switch box board, rev 00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IR-55 PCB

author: nramsey
Top
Bottom

2 layer board of 0.90 x 0.99 inches (23.0 x 25.2 mm)
Uploaded: July 30, 2025
Shared: July 30, 2025
Total Price: $4.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DB25 to FPC 22 pin

author: Turnerk6
Top
Bottom

2 layer board of 2.06 x 2.47 inches (52.3 x 62.7 mm)
Uploaded: April 30, 2025
Shared: July 29, 2025
Total Price: $25.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DB25 to FPC 15 pin

author: Turnerk6
Top
Bottom

2 layer board of 2.06 x 2.47 inches (52.3 x 62.7 mm)
Uploaded: April 30, 2025
Shared: July 29, 2025
Total Price: $25.40

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Walkie-Textie Wireless Communicator

author: johnsondavies
Top
Bottom

2 layer board of 1.50 x 3.05 inches (38.1 x 77.5 mm)
Uploaded: July 27, 2025
Shared: July 29, 2025
Total Price: $22.85

The Walkie-Textie is a simple handheld device with a 12-key keypad and OLED display that allows you to send and receive text messages using the LoRa wireless protocol.

For more information see <http://www.technoblogy.com/show?2AON>.

The Walkie-Textie is a simple handheld device with a 12-key keypad and OLED display that allows you to send and receive text messages using the LoRa wireless protocol.

For more information see <http://www.technoblogy.com/show?2AON>.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

kstars-ekos-smd-0-9.kicad_pro_86.5x56.5mm_for_Default

author: FireNWater
Top
Bottom

2 layer board of 3.41 x 2.22 inches (86.5 x 56.5 mm)
Uploaded: July 28, 2025
Shared: July 28, 2025
Total Price: $37.85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

wbpa.kicad_pcb

author: tdsibtk
Top
Bottom

4 layer board of 2.71 x 1.71 inches (68.8 x 43.5 mm)
Uploaded: July 28, 2025
Shared: July 28, 2025
Total Price: $46.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCB_for_Vacuum_Can_Probe v12_2025-07-28

author: NHuber
Top
Bottom

2 layer board of 0.85 x 0.85 inches (21.7 x 21.7 mm)
Uploaded: July 28, 2025
Shared: July 28, 2025
Total Price: $3.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PCB_for_Vacuum_Can_Probe v13_2025-07-28

author: NHuber
Top
Bottom

2 layer board of 0.85 x 0.85 inches (21.7 x 21.7 mm)
Uploaded: July 28, 2025
Shared: July 28, 2025
Total Price: $3.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RTD_Calibrator_PCB_V3R1

author: mgenovese
Top
Bottom

2 layer board of 1.96 x 3.70 inches (49.8 x 94.0 mm)
Uploaded: July 28, 2025
Shared: July 28, 2025
Total Price: $36.25

V3R1: Reduced clearance in SW1 mounting hole, Repositioned SW1 pads and added SMT pads to aid in alignment and soldering. Added additional labels to PCB Bottom. Clipped PCB corners for clearance with box.

V3R1: Reduced clearance in SW1 mounting hole, Repositioned SW1 pads and added SMT pads to aid in alignment and soldering. Added additional labels to PCB Bottom. Clipped PCB corners for clearance with box.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MPPT Solar Charger 1.0 (CN3722)

author: MalteP
Top
Bottom

2 layer board of 2.37 x 1.34 inches (60.2 x 34.1 mm)
Uploaded: July 27, 2025
Shared: July 27, 2025
Total Price: $15.90

Charge controller for LiIon or LiFePO4 batteries with maximum power point tracking and temperature monitoring

Project description: https://www.maltepoeggel.de/?site=solar-mppt-cn3722

Charge controller for LiIon or LiFePO4 batteries with maximum power point tracking and temperature monitoring

Project description: https://www.maltepoeggel.de/?site=solar-mppt-cn3722

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DRV+ULN v1 Stepper IAC and Aux Expansion outputs for EFI

author: PSIG
Top
Bottom

2 layer board of 1.07 x 1.90 inches (27.2 x 48.3 mm)
Uploaded: July 23, 2025
Shared: July 27, 2025
Total Price: $10.15

Expansion board for EFI stepper IAC with DRV8825 module, and 4 additional 1-amp outputs using a ULN2803. Intended for DIY-style EFI projects such as Speeduino, Megasquirt and RusEFI. More info: https://speeduino.com/forum/viewtopic.php?t=1399

Expansion board for EFI stepper IAC with DRV8825 module, and 4 additional 1-amp outputs using a ULN2803. Intended for DIY-style EFI projects such as Speeduino, Megasquirt and RusEFI. More info: https://speeduino.com/forum/viewtopic.php?t=1399

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TactileAudio Basic v1.2

author: cjames53
Top
Bottom

2 layer board of 2.15 x 2.56 inches (54.6 x 64.9 mm)
Uploaded: July 25, 2025
Shared: July 25, 2025
Total Price: $27.45

Circuit board for the TactileAudio project: https://tactileaudio.org, a four-channel capacitive-touch system with audio output only (no vibrator support).

Circuit board for the TactileAudio project: https://tactileaudio.org, a four-channel capacitive-touch system with audio output only (no vibrator support).

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TactileAudio v1.2

author: cjames53
Top
Bottom

2 layer board of 3.02 x 2.56 inches (76.6 x 64.9 mm)
Uploaded: July 25, 2025
Shared: July 25, 2025
Total Price: $38.50

Circuit board for the TactileAudio project: https://tactileaudio.org a four-channel capacitive-touch system with audio output. This is the full circuit including haptic (vibrator) drivers.

Circuit board for the TactileAudio project: https://tactileaudio.org a four-channel capacitive-touch system with audio output. This is the full circuit including haptic (vibrator) drivers.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PhysCap2lay

author: taite
Top
Bottom

2 layer board of 2.21 x 1.00 inches (56.1 x 25.5 mm)
Uploaded: July 24, 2025
Shared: July 24, 2025
Total Price: $11.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Sony P-3 S-Video Chroma Isolator v1.1

author: KPackLabs
Top
Bottom

2 layer board of 4.45 x 1.40 inches (113.0 x 35.6 mm)
Uploaded: July 23, 2025
Shared: July 23, 2025
Total Price: $31.10

An optocoupler PCB designed for S-Video mods for Sony CRT TVs utilizing the P-3 chassis (CX20193 or CXA1013 jungle chip). Because these TVs have a hot chassis, an optocoupler should be used to isolate the Chroma input from the hot ground.

Bill-of-Materials:

  • C1 and C4: 0.01-1uF 50V Ceramic or …

Show full description

An optocoupler PCB designed for S-Video mods for Sony CRT TVs utilizing the P-3 chassis (CX20193 or CXA1013 jungle chip). Because these TVs have a hot chassis, an optocoupler should be used to isolate the Chroma input from the hot ground.

Bill-of-Materials:

  • C1 and C4: 0.01-1uF 50V Ceramic or …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SiPMx4-carrier-v2.kicad_pcb

author: sluitz-s
Top
Bottom

2 layer board of 0.63 x 0.63 inches (16.0 x 16.0 mm)
Uploaded: July 23, 2025
Shared: July 23, 2025
Total Price: $1.95

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PNP FlexPCB

author: BradleyKerkhofUMD
Top
Bottom

2 layer board of 3.15 x 15.79 inches (80.0 x 401.0 mm)
Uploaded: July 23, 2025
Shared: July 23, 2025
Total Price: $248.65

FlexPCB to serve as ribbon cable for 20x20 PNP electronics

FlexPCB to serve as ribbon cable for 20x20 PNP electronics

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SiPM-cold-preamp-v2.kicad_pcb

author: jvaccaro
Top
Bottom

4 layer board of 1.14 x 1.14 inches (29.0 x 29.0 mm)
Uploaded: July 22, 2025
Shared: July 22, 2025
Total Price: $13.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MicroDtoSMA

author: MicroDtoSMA
Top
Bottom

2 layer board of 4.18 x 1.80 inches (106.1 x 45.8 mm)
Uploaded: July 22, 2025
Shared: July 22, 2025
Total Price: $37.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy