Shared Projects

Shared Projects

Attiny 2313/4313 programmer V2

author: DanR
Top
Bottom

2 layer board of 2.07 x 2.08 inches (52.5 x 52.8 mm)
Uploaded: February 25, 2016
Shared: March 04, 2016
Total Price: $21.50

VERIFIED WORKING

Arduino Uno shield for programming the ATtiny2313/4313 Push in style chip. Including LED for testing with default blink example, breakout headers for ATtiny2313/4313 pin output to test and develop programs before permanent application, and a jumper to disconnect the capacito…

Show full description

VERIFIED WORKING

Arduino Uno shield for programming the ATtiny2313/4313 Push in style chip. Including LED for testing with default blink example, breakout headers for ATtiny2313/4313 pin output to test and develop programs before permanent application, and a jumper to disconnect the capacito…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

rusefi max9926

author: rusefi
Top
Bottom

2 layer board of 1.09 x 0.71 inches (27.6 x 18.1 mm)
Uploaded: March 04, 2016
Shared: March 04, 2016
Total Price: $3.85

vr or hall

vr or hall

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

3G 5D Shield

author: clothbot
Top
Bottom

2 layer board of 3.23 x 1.71 inches (81.9 x 43.5 mm)
Uploaded: March 03, 2016
Shared: March 03, 2016
Total Price: $27.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

L298 Motor Driver

author: methuzla
Top
Bottom

2 layer board of 1.20 x 1.55 inches (30.5 x 39.4 mm)
Uploaded: March 03, 2016
Shared: March 03, 2016
Total Price: $9.25

[TESTED: WORKS] L298 dual H-bridge motor driver. Diode area is pretty tight.

[TESTED: WORKS] L298 dual H-bridge motor driver. Diode area is pretty tight.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Teensy Board v1.0.2

author: ZSSJQI
Top
Bottom

2 layer board of 1.21 x 2.91 inches (30.8 x 74.0 mm)
Uploaded: March 03, 2016
Shared: March 03, 2016
Total Price: $17.65

Teensy to Color Sensor Breakout Board

Teensy to Color Sensor Breakout Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SwitchBreakout

author: ZSSJQI
Top
Bottom

2 layer board of 0.70 x 2.10 inches (17.8 x 53.4 mm)
Uploaded: March 03, 2016
Shared: March 03, 2016
Total Price: $7.35

12 Poles to 10 pin breakout x2

12 Poles to 10 pin breakout x2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

KSURCT 15-16 shield

author: KSURCT1516Shield
Top
Bottom

2 layer board of 2.51 x 3.81 inches (63.6 x 96.7 mm)
Uploaded: March 03, 2016
Shared: March 03, 2016
Total Price: $47.65

Shield for KSU RCT project

Shield for KSU RCT project

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IMU_MSU_PCB

author: sgleason
Top
Bottom

2 layer board of 3.92 x 2.76 inches (99.5 x 70.0 mm)
Uploaded: March 03, 2016
Shared: March 03, 2016
Total Price: $53.95

Controller PCB

Controller PCB

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Accelerometer Backpack

author: alexre
Top
Bottom

2 layer board of 0.69 x 0.48 inches (17.5 x 12.1 mm)
Uploaded: March 03, 2016
Shared: March 03, 2016
Total Price: $1.60

MPU6000 Version 1

MPU6000 Version 1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

6DJ8 Tube Headphone Amp Power Supply

author: jbwebst
Top
Bottom

2 layer board of 5.56 x 3.03 inches (141.1 x 77.0 mm)
Uploaded: March 03, 2016
Shared: March 03, 2016
Total Price: $84.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Alice 3 v3

author: lkesteloot
Top
Bottom

2 layer board of 3.56 x 1.91 inches (90.3 x 48.4 mm)
Uploaded: March 03, 2016
Shared: March 03, 2016
Total Price: $33.85

SMD version of Alice 3 Z80 computer

SMD version of Alice 3 Z80 computer

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

R/C Servo PDB v1.0

author: BlazeFPV
Top
Bottom

2 layer board of 0.79 x 1.10 inches (20.1 x 28.0 mm)
Uploaded: March 03, 2016
Shared: March 03, 2016
Total Price: $4.35

8 Port Servo Power Distribution Board for R/C Models

Use Pololu Step-Down regulator D24V50F5 or similar pin-out regulator if you want to plug one directly into the board. Otherwise, just connect whatever BEC you want with leads.

8 Port Servo Power Distribution Board for R/C Models

Use Pololu Step-Down regulator D24V50F5 or similar pin-out regulator if you want to plug one directly into the board. Otherwise, just connect whatever BEC you want with leads.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BNO055LiPoBoard.v03a

author: PeskyProducts
Top
Bottom

4 layer board of 1.44 x 0.62 inches (36.7 x 15.8 mm)
Uploaded: March 03, 2016
Shared: March 03, 2016
Total Price: $8.90

Minimized board width.

Minimized board width.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

fluke845 references

author: SquantMuts
Top
Bottom

2 layer board of 1.77 x 1.22 inches (45.0 x 31.0 mm)
Uploaded: February 10, 2016
Shared: March 02, 2016
Total Price: $10.80

fluke845 references

fluke845 references

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

breadboard_single_ldo.brd

author: SquantMuts
Top
Bottom

2 layer board of 0.80 x 1.20 inches (20.3 x 30.5 mm)
Uploaded: December 01, 2015
Shared: March 02, 2016
Total Price: $4.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

WeMos RFLink + OLED shield

author: hallard
Top
Bottom

2 layer board of 1.31 x 1.01 inches (33.3 x 25.7 mm)
Uploaded: March 02, 2016
Shared: March 02, 2016
Total Price: $6.60

WeMos adapter for RFLink project + I2C OLED See github description for more information
See my blog for some other projects

WeMos adapter for RFLink project + I2C OLED See github description for more information
See my blog for some other projects

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STM32 JTAG adapter

author: izzy84075
Top
Bottom

2 layer board of 0.64 x 1.10 inches (16.2 x 27.9 mm)
Uploaded: December 26, 2013
Shared: March 02, 2016
Total Price: $3.50

Board to go from 20-pin JTAG to 6-pin SWD

Board to go from 20-pin JTAG to 6-pin SWD

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TEST: BeagleLogic v1.1

author: fustini
Top
Bottom

2 layer board of 2.15 x 2.80 inches (54.7 x 71.0 mm)
Uploaded: March 02, 2016
Shared: March 02, 2016
Total Price: $30.10

[UPDATE: 2016-06-02] Uploaded KiCad PCB file from GitHub repo: https://oshpark.com/projects/afSmusg1

THIS IS NOT TESTED! Kumar: you can get the gerbers from https://goo.gl/kku0VM (drill is in a separate folder), although the folder says "rev1" but they're for v1.1

[UPDATE: 2016-06-02] Uploaded KiCad PCB file from GitHub repo: https://oshpark.com/projects/afSmusg1

THIS IS NOT TESTED! Kumar: you can get the gerbers from https://goo.gl/kku0VM (drill is in a separate folder), although the folder says "rev1" but they're for v1.1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SIl to DIL adpater

author: Altitude909
Top
Bottom

2 layer board of 0.59 x 1.63 inches (14.9 x 41.3 mm)
Uploaded: April 26, 2014
Shared: March 01, 2016
Total Price: $4.75

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

12vAuto3to8

author: cmaxwell
Top
Bottom

2 layer board of 1.96 x 2.02 inches (49.7 x 51.3 mm)
Uploaded: March 01, 2016
Shared: March 01, 2016
Total Price: $19.75

Binary converter for 12v car lights. Used to convert digital ('ABC' wires) output from GM transmission to directly power 12v dash lights (P,R,N,D,2,Low,…) in older cars.

IC1: CD4011BE

IC2-4: CD4023BE

R1-8: 1k

R9-11: 4k7

Q1-8: 2N2907

Headers are 5mm screw terminals (though it …

Show full description

Binary converter for 12v car lights. Used to convert digital ('ABC' wires) output from GM transmission to directly power 12v dash lights (P,R,N,D,2,Low,…) in older cars.

IC1: CD4011BE

IC2-4: CD4023BE

R1-8: 1k

R9-11: 4k7

Q1-8: 2N2907

Headers are 5mm screw terminals (though it …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy