Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

TouchPad Demo Board

author: bwshockley
Top
Bottom

2 layer board of 1.86 x 2.14 inches (47.3 x 54.4 mm)
Uploaded: September 16, 2016
Shared: September 16, 2016
Total Price: $19.90

Simple demonstration board for various touch pad manufacturing techniques.

It should have four surface touch pads, and 7 side touch pads in two groups of 3 and 4. Group of 4 side touch pads are created with one technique, and the group of 3 side touch pads are created with another.

No real…

Show full description

Simple demonstration board for various touch pad manufacturing techniques.

It should have four surface touch pads, and 7 side touch pads in two groups of 3 and 4. Group of 4 side touch pads are created with one technique, and the group of 3 side touch pads are created with another.

No real…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LEDFOB_r2d.brd

author: jlgegner
Top
Bottom

2 layer board of 0.90 x 2.10 inches (22.9 x 53.4 mm)
Uploaded: September 15, 2016
Shared: September 16, 2016
Total Price: $9.45

ATTiny85 CR2032 Battery powered LED fob

ATTiny85 CR2032 Battery powered LED fob

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pwm 555 v1.2 Updated with corrected legs for pot

author: SwedishVaper
Top
Bottom

2 layer board of 0.51 x 0.91 inches (12.8 x 23.0 mm)
Uploaded: September 16, 2016
Shared: September 16, 2016
Total Price: $2.25

UNTESTED. Use at own risk until I can confirm working. Should work, but no guarantees.

(Support will only be offered on projects marked "TESTED AND WORKING", and only on the moxbods facebook group.

Any previous projects that are now deleted are us…

Show full description

UNTESTED. Use at own risk until I can confirm working. Should work, but no guarantees.

(Support will only be offered on projects marked "TESTED AND WORKING", and only on the moxbods facebook group.

Any previous projects that are now deleted are us…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

gpioLeafSkellington.brd

author: nemesisContreras
Top
Bottom

2 layer board of 2.39 x 0.67 inches (60.7 x 17.0 mm)
Uploaded: September 16, 2016
Shared: September 16, 2016
Total Price: $7.95

compatible w/ Model B+/Pi 2/Pi 3 designed by yours truly.

compatible w/ Model B+/Pi 2/Pi 3 designed by yours truly.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Thermocouple Amp

author: mszawisz
Top
Bottom

2 layer board of 0.91 x 0.47 inches (23.2 x 11.9 mm)
Uploaded: September 15, 2016
Shared: September 15, 2016
Total Price: $2.10

AD849x breakout

AD849x breakout

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Arduino Mega Shield - AD+STP

author: cm_development
Top
Bottom

2 layer board of 3.43 x 2.10 inches (87.2 x 53.3 mm)
Uploaded: September 15, 2016
Shared: September 15, 2016
Total Price: $35.95

PCB for Arduino Mega Development

PCB for Arduino Mega Development

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Antenna switch.brd

author: Midelic
Top
Bottom

2 layer board of 0.87 x 0.73 inches (22.1 x 18.5 mm)
Uploaded: September 15, 2016
Shared: September 15, 2016
Total Price: $3.15

RF switch PE42641

RF switch PE42641

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

One Watt Audio Amplifier - RevA

author: Blueberry
Top
Bottom

2 layer board of 1.50 x 1.25 inches (38.1 x 31.8 mm)
Uploaded: September 14, 2016
Shared: September 15, 2016
Total Price: $9.35

Revised One Watt audio amplifier with a Mini USB port and a IS31AP4991A amplifier. C1 thru C3 are 1uF ceramic caps, C4 is a 100uF electrolytic. R1 thru R3 are 4.7k-ohm resistors. R4 and R5 are 47k-ohm for a gain of 10 (20 dB) on the amplifier. As in the previous one-watt amplifier, a stereo si…

Show full description

Revised One Watt audio amplifier with a Mini USB port and a IS31AP4991A amplifier. C1 thru C3 are 1uF ceramic caps, C4 is a 100uF electrolytic. R1 thru R3 are 4.7k-ohm resistors. R4 and R5 are 47k-ohm for a gain of 10 (20 dB) on the amplifier. As in the previous one-watt amplifier, a stereo si…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Sensorboard v4.2

author: z2amiller
Top
Bottom

2 layer board of 1.67 x 0.77 inches (42.3 x 19.5 mm)
Uploaded: July 09, 2016
Shared: September 14, 2016
Total Price: $6.35

ESP8266 Sensorboard with switching regulator and BME280

ESP8266 Sensorboard with switching regulator and BME280

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

9-Up cheapie XP V2.1

author: DavidEF
Top
Bottom

2 layer board of 0.89 x 0.89 inches (22.5 x 22.5 mm)
Uploaded: September 14, 2016
Shared: September 14, 2016
Total Price: $3.90

9x Cree XP PCB for cheap 9-LED flashlights. Although the Cree XP LEDs have a separate, electrically neutral thermal pad, it has been joined with LED- on this board, to help spread heat away from the LEDs. Most LED flashlight drivers use the LED- for current regulation. This board won't work with …

Show full description

9x Cree XP PCB for cheap 9-LED flashlights. Although the Cree XP LEDs have a separate, electrically neutral thermal pad, it has been joined with LED- on this board, to help spread heat away from the LEDs. Most LED flashlight drivers use the LED- for current regulation. This board won't work with …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PUREmodules Passthrough Module

author: PureEngineering
Top
Bottom

2 layer board of 1.01 x 1.01 inches (25.6 x 25.6 mm)
Uploaded: August 30, 2016
Shared: September 14, 2016
Total Price: $5.05

Pass through module for PUREmodules This allows splitting a single channel into 3. This also allows for bending around edges as well.

Come check out the design concept for [PUREmodules](http://www.pureengineering.com/projects/modularsensor/ "PUR…

Show full description

Pass through module for PUREmodules This allows splitting a single channel into 3. This also allows for bending around edges as well.

Come check out the design concept for [PUREmodules](http://www.pureengineering.com/projects/modularsensor/ "PUR…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LedLampEffectV1.1

author: MectronicsInc
Top
Bottom

2 layer board of 0.45 x 0.53 inches (11.5 x 13.5 mm)
Uploaded: September 14, 2016
Shared: September 14, 2016
Total Price: $1.20

LedLampEffectV1.1

LedLampEffectV1.1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MMF RGB LED Mixer

author: SteveGarward
Top
Bottom

2 layer board of 1.36 x 1.18 inches (34.6 x 29.8 mm)
Uploaded: September 14, 2016
Shared: September 14, 2016
Total Price: $8.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MMF LED Sound Meter

author: SteveGarward
Top
Bottom

2 layer board of 1.84 x 1.70 inches (46.7 x 43.2 mm)
Uploaded: September 14, 2016
Shared: September 14, 2016
Total Price: $15.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RPiCC REV2.1

author: smithRA
Top
Bottom

2 layer board of 3.39 x 1.14 inches (86.0 x 29.0 mm)
Uploaded: September 14, 2016
Shared: September 14, 2016
Total Price: $19.30

Main board for RPiCC project

Main board for RPiCC project

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RPiCC DC Power Board REV1.1

author: smithRA
Top
Bottom

2 layer board of 3.74 x 2.21 inches (95.0 x 56.0 mm)
Uploaded: September 14, 2016
Shared: September 14, 2016
Total Price: $41.20

DC power board for the RPiCC project

DC power board for the RPiCC project

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OTS2_gerber.zip

author: wyojustin
Top
Bottom

2 layer board of 5.31 x 4.91 inches (134.8 x 124.7 mm)
Uploaded: September 14, 2016
Shared: September 14, 2016
Total Price: $130.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

encA_gerber.zip

author: wyojustin
Top
Bottom

2 layer board of 1.41 x 1.41 inches (35.8 x 35.8 mm)
Uploaded: September 14, 2016
Shared: September 14, 2016
Total Price: $9.90

Encoder Booster for VeloKey

Encoder Booster for VeloKey

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

encB_gerber.zip

author: wyojustin
Top
Bottom

2 layer board of 1.41 x 1.41 inches (35.8 x 35.8 mm)
Uploaded: September 14, 2016
Shared: September 14, 2016
Total Price: $9.90

Booster Board for VK Encoder

Booster Board for VK Encoder

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

encC_gerber.zip

author: wyojustin
Top
Bottom

2 layer board of 1.51 x 1.51 inches (38.3 x 38.3 mm)
Uploaded: September 14, 2016
Shared: September 14, 2016
Total Price: $11.35

Center Encoder Booster for VeloKey

Center Encoder Booster for VeloKey

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy