Shared Projects

Shared Projects

ESP3212 ESP32 breakout board v1

author: falkenad
Top
Bottom

2 layer board of 0.94 x 1.83 inches (23.9 x 46.4 mm)
Uploaded: September 12, 2016
Shared: September 12, 2016
Total Price: $8.55

A breakout board for the new ESP32, specifically in the form of the ESP3212 module. This breakout board contains an FT231X USB to UART IC, an auto-reset circuit, space for a JST battery connector underneath, and a 600mA 3.3V linear regulator.

A breakout board for the new ESP32, specifically in the form of the ESP3212 module. This breakout board contains an FT231X USB to UART IC, an auto-reset circuit, space for a JST battery connector underneath, and a 600mA 3.3V linear regulator.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Bean+ Breakout+ 5v - Rev1

author: nm3210
Top
Bottom

2 layer board of 2.21 x 1.51 inches (56.0 x 38.2 mm)
Uploaded: September 12, 2016
Shared: September 12, 2016
Total Price: $16.60

Quick test of a Bean+ Breakout+ board w/ switches (using 5v).

Quick test of a Bean+ Breakout+ board w/ switches (using 5v).

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FTDI Breadboard adapter

author: Lithiumbot
Top
Bottom

2 layer board of 0.68 x 0.65 inches (17.2 x 16.6 mm)
Uploaded: May 18, 2015
Shared: September 11, 2016
Total Price: $2.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

InlineTap 2.1

author: diyevil
Top
Bottom

2 layer board of 1.07 x 0.69 inches (27.0 x 17.6 mm)
Uploaded: January 06, 2014
Shared: September 11, 2016
Total Price: $3.65

Revised with better logo

Revised with better logo

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

nanomixer

author: macfergus
Top
Bottom

2 layer board of 3.60 x 2.20 inches (91.5 x 55.9 mm)
Uploaded: February 06, 2016
Shared: September 11, 2016
Total Price: $39.60

Tiny 2-channel stereo mixer.

Tiny 2-channel stereo mixer.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STAB_1

author: thatguy333
Top
Bottom

2 layer board of 6.18 x 1.23 inches (156.9 x 31.1 mm)
Uploaded: September 01, 2016
Shared: September 11, 2016
Total Price: $37.80

STAB_1

STAB_1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SPI shift-latch visual tester

author: mrnuke
Top
Bottom

2 layer board of 3.70 x 1.26 inches (94.0 x 32.0 mm)
Uploaded: September 11, 2016
Shared: September 11, 2016
Total Price: $23.30

A great way to test SPI drivers and make flashy blinky lights.

A great way to test SPI drivers and make flashy blinky lights.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

RFM69-CW Breadboard Breakout

author: bc547
Top
Bottom

2 layer board of 1.00 x 0.75 inches (25.5 x 19.2 mm)
Uploaded: September 11, 2016
Shared: September 11, 2016
Total Price: $3.75

This is a small minimalistic RFM69-CW board meant for experimental breadboard designs. All pins are available at the breadboard headers. The zipfile contains the gerber files and a pdf file with full schematic, BOM, outline and assembly diagrams and an embedded interactive 3D model view (for the …

Show full description

This is a small minimalistic RFM69-CW board meant for experimental breadboard designs. All pins are available at the breadboard headers. The zipfile contains the gerber files and a pdf file with full schematic, BOM, outline and assembly diagrams and an embedded interactive 3D model view (for the …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Button Breakout

author: Merlin04
Top
Bottom

2 layer board of 0.56 x 0.32 inches (14.1 x 8.1 mm)
Uploaded: September 11, 2016
Shared: September 11, 2016
Total Price: $0.85

Easily wire pushbuttons.

Easily wire pushbuttons.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Simon Monk 555 R/G Flasher

author: Rasyoung
Top
Bottom

2 layer board of 1.49 x 1.20 inches (37.8 x 30.5 mm)
Uploaded: September 11, 2016
Shared: September 11, 2016
Total Price: $8.90

Exported Eagle Gerber test

Exported Eagle Gerber test

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Atmel328p/Arduino Breadboard Breakout

author: bc547
Top
Bottom

2 layer board of 1.00 x 1.30 inches (25.5 x 33.1 mm)
Uploaded: September 11, 2016
Shared: September 11, 2016
Total Price: $6.50

This is a small minimalistic Atmel328p/Arduino board meant for experimental breadboard designs. It features a FTDI and an AVR ISP connector. All commonly used MCU pins are available at the breadboard headers. There is no onboard power regulator, so supplied voltage can be anything between 2.4 and…

Show full description

This is a small minimalistic Atmel328p/Arduino board meant for experimental breadboard designs. It features a FTDI and an AVR ISP connector. All commonly used MCU pins are available at the breadboard headers. There is no onboard power regulator, so supplied voltage can be anything between 2.4 and…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

esp3212_breadboard

author: kim
Top
Bottom

2 layer board of 1.51 x 0.75 inches (38.4 x 19.1 mm)
Uploaded: September 11, 2016
Shared: September 11, 2016
Total Price: $5.65

Untested - error on board

Revised version here:

https://oshpark.com/shared_projects/66JM0rPV

0t.png

Untested - error on board

Revised version here:

https://oshpark.com/shared_projects/66JM0rPV

0t.png

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Square Wave Oscillator

author: orlandohoilett
Top
Bottom

2 layer board of 0.80 x 0.46 inches (20.3 x 11.6 mm)
Uploaded: July 24, 2016
Shared: September 10, 2016
Total Price: $1.80

A simple square wave oscillator using an astable multivibrator. Has an LED output for visualization. I used this oscillator for my Team Valor Light-Up Badge for Pokemon GO.

http://www.instructables.com/id/Team-Valor-Light-Up-Badge-for-Pokemon-GO/

Tested and works.

A simple square wave oscillator using an astable multivibrator. Has an LED output for visualization. I used this oscillator for my Team Valor Light-Up Badge for Pokemon GO.

http://www.instructables.com/id/Team-Valor-Light-Up-Badge-for-Pokemon-GO/

Tested and works.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

sampleBoardrev2.brd

author: andrea
Top
Bottom

2 layer board of 1.26 x 1.26 inches (32.0 x 32.0 mm)
Uploaded: September 10, 2016
Shared: September 10, 2016
Total Price: $7.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

cryoamp02.brd

author: andrea
Top
Bottom

2 layer board of 1.36 x 0.99 inches (34.5 x 25.0 mm)
Uploaded: September 10, 2016
Shared: September 10, 2016
Total Price: $6.65

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

12 Port SCART Switcher

author: numbski
Top
Bottom

2 layer board of 10.00 x 3.60 inches (254.0 x 91.5 mm)
Uploaded: September 10, 2016
Shared: September 10, 2016
Total Price: $180.05

https://www.youtube.com/watch?v=AH5M4Xj5-RY

https://www.youtube.com/watch?v=AH5M4Xj5-RY

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

UniversalGlucometer.brd

author: LearnByMaking
Top
Bottom

2 layer board of 1.58 x 2.56 inches (40.0 x 65.0 mm)
Uploaded: September 08, 2016
Shared: September 10, 2016
Total Price: $20.15

Glucometer that can be configured to work with strips from multiple manufacturers

Glucometer that can be configured to work with strips from multiple manufacturers

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VIM878 HT1621B Display

author: scd
Top
Bottom

2 layer board of 1.87 x 1.23 inches (47.5 x 31.3 mm)
Uploaded: July 31, 2016
Shared: September 10, 2016
Total Price: $11.50

This is a LC-display breakout board for VIM878-LCD with HT1621B.

Alt schematic

Tested and working.

This is a LC-display breakout board for VIM878-LCD with HT1621B.

Alt schematic

Tested and working.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

STM32F030F4P6 breakout

author: scd
Top
Bottom

2 layer board of 1.00 x 0.70 inches (25.4 x 17.8 mm)
Uploaded: January 30, 2016
Shared: September 10, 2016
Total Price: $3.45

Design goal: as small as possible version of an STM32F030F4P6 breakout board, but even usable for breadboards

ALT schematic

Tested and working

Design goal: as small as possible version of an STM32F030F4P6 breakout board, but even usable for breadboards

ALT schematic

Tested and working

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Paste injector

author: Terje
Top
Bottom

2 layer board of 1.58 x 1.18 inches (40.0 x 30.0 mm)
Uploaded: August 13, 2016
Shared: September 10, 2016
Total Price: $9.30

https://github.com/zapta/misc/tree/6960ff6324ea60601783a89b59c32b55a307ca96/paste_injector

https://github.com/zapta/misc/tree/6960ff6324ea60601783a89b59c32b55a307ca96/paste_injector

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy