Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

bml_pmod_over_hdmi_01

author: BlackMesaLabs
Top
Bottom

2 layer board of 0.81 x 0.83 inches (20.5 x 21.1 mm)
Uploaded: December 18, 2017
Shared: December 18, 2017
Total Price: $3.35

Repurpose a standard HDMI cable to extend a PMOD connection. Board is reversible populated to be either Male of Female PMOD so that single design may be used at both ends of cable.

Repurpose a standard HDMI cable to extend a PMOD connection. Board is reversible populated to be either Male of Female PMOD so that single design may be used at both ends of cable.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TO-220 MOSFET fuzz

author: RufusKhan
Top
Bottom

2 layer board of 1.16 x 0.85 inches (29.5 x 21.6 mm)
Uploaded: July 28, 2017
Shared: December 18, 2017
Total Price: $4.90

I designed this fuzz around some secret sauce MOSFETs, but it will work with any standard TO-220 MOSFETs with the right pin out. It's a pretty simple 2 knob fuzz circuit without any tone controls. Tone shaping is done through the drain bypass cap on the first stage to tame the high end. The brigh…

Show full description

I designed this fuzz around some secret sauce MOSFETs, but it will work with any standard TO-220 MOSFETs with the right pin out. It's a pretty simple 2 knob fuzz circuit without any tone controls. Tone shaping is done through the drain bypass cap on the first stage to tame the high end. The brigh…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HP 3458A A9 reference board 03458-66509 (v2)

author: pepaslabs
Top
Bottom

2 layer board of 1.95 x 1.68 inches (49.6 x 42.6 mm)
Uploaded: December 18, 2017
Shared: December 18, 2017
Total Price: $16.40

This is a clone of HP's LTZ1000-based 7V reference board as used in the 3458A 8.5-digit multimeter. See https://github.com/pepaslabs/hp-03458-66509-clone

This is a clone of HP's LTZ1000-based 7V reference board as used in the 3458A 8.5-digit multimeter. See https://github.com/pepaslabs/hp-03458-66509-clone

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

QX

author: undertalk
Top
Bottom

2 layer board of 1.98 x 3.94 inches (50.2 x 100.2 mm)
Uploaded: December 18, 2017
Shared: December 18, 2017
Total Price: $38.90

QX LTZ1000 +7V Reference

QX LTZ1000 +7V Reference

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Golf Ball Lapel Pin

author: mozzwald
Top
Bottom

2 layer board of 0.52 x 0.52 inches (13.2 x 13.2 mm)
Uploaded: December 04, 2017
Shared: December 17, 2017
Total Price: $1.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Swimming Lapel Pin

author: mozzwald
Top
Bottom

2 layer board of 0.68 x 0.48 inches (17.2 x 12.1 mm)
Uploaded: December 04, 2017
Shared: December 17, 2017
Total Price: $1.60

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Star Wars Lapel Pin

author: mozzwald
Top
Bottom

2 layer board of 0.81 x 0.42 inches (20.6 x 10.6 mm)
Uploaded: December 04, 2017
Shared: December 17, 2017
Total Price: $1.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Seahorse Lapel Pin

author: mozzwald
Top
Bottom

2 layer board of 0.40 x 0.68 inches (10.2 x 17.2 mm)
Uploaded: December 05, 2017
Shared: December 17, 2017
Total Price: $1.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BlinkyTile Controller3.brd

author: dunk8888
Top
Bottom

2 layer board of 1.59 x 1.00 inches (40.3 x 25.3 mm)
Uploaded: November 07, 2017
Shared: December 17, 2017
Total Price: $7.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

relayconverter.brd

author: daleykd
Top
Bottom

2 layer board of 3.51 x 0.41 inches (89.2 x 10.5 mm)
Uploaded: September 21, 2016
Shared: December 17, 2017
Total Price: $7.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Eggbot-Spherbot-Polarbot

author: LordFennec
Top
Bottom

2 layer board of 3.30 x 1.70 inches (83.9 x 43.3 mm)
Uploaded: December 17, 2017
Shared: December 17, 2017
Total Price: $28.15

https://www.thingiverse.com/thing:1394948 https://github.com/MarkJB/Eggbot-Spherebot-polargraph-Controller

https://www.thingiverse.com/thing:1394948 https://github.com/MarkJB/Eggbot-Spherebot-polargraph-Controller

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ESP32-HUB75-WIFI

author: BIRD-TEHCSTEP
Top
Bottom

2 layer board of 1.15 x 2.00 inches (29.3 x 50.9 mm)
Uploaded: December 17, 2017
Shared: December 17, 2017
Total Price: $11.55

ESP32-HUB75-WIFI add USB Power blank

ESP32-HUB75-WIFI add USB Power blank

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LGA_14L_Breakout.kicad_pcb

author: RyanBahneman
Top
Bottom

2 layer board of 0.64 x 0.46 inches (16.3 x 11.6 mm)
Uploaded: December 17, 2017
Shared: December 17, 2017
Total Price: $1.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Semtech SX1236 Dev board

author: OreSat
Top
Bottom

4 layer board of 2.91 x 2.48 inches (74.0 x 63.0 mm)
Uploaded: July 31, 2017
Shared: December 17, 2017
Total Price: $72.20

v1 of the SX1236 evaluation board

v1 of the SX1236 evaluation board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

oresat-proto-card v1.1

author: OreSat
Top
Bottom

2 layer board of 3.89 x 3.76 inches (98.7 x 95.4 mm)
Uploaded: October 02, 2017
Shared: December 17, 2017
Total Price: $72.95

OreSat prototype card v1.1

OreSat prototype card v1.1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ts52002-breakout

author: OreSat
Top
Bottom

2 layer board of 1.42 x 1.10 inches (36.0 x 28.0 mm)
Uploaded: December 17, 2017
Shared: December 17, 2017
Total Price: $7.80

Breakout board for the Semtech TS52002 MPPT IC. Not recommended for new designs :(

Breakout board for the Semtech TS52002 MPPT IC. Not recommended for new designs :(

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Orion

author: AVO
Top
Bottom

2 layer board of 2.39 x 0.85 inches (60.8 x 21.6 mm)
Uploaded: December 16, 2017
Shared: December 16, 2017
Total Price: $10.15

The Orion is a simple power module to convert a USB power source into a regulated positive and negative power supply for use with breadboards. It is designed to be small, and easily used with any five volt USB power brick.

[Orion on GitHub](https://github.com/camerontbelt/Orion-Portable-Power-…

Show full description

The Orion is a simple power module to convert a USB power source into a regulated positive and negative power supply for use with breadboards. It is designed to be small, and easily used with any five volt USB power brick.

[Orion on GitHub](https://github.com/camerontbelt/Orion-Portable-Power-…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

AMG8833.v01a

author: PeskyProducts
Top
Bottom

4 layer board of 0.71 x 0.41 inches (17.9 x 10.3 mm)
Uploaded: December 16, 2017
Shared: December 16, 2017
Total Price: $2.80

Improved layout and passive placement.

Improved layout and passive placement.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LEA Prototype.kicad_pcb

author: KD5SSJ
Top
Bottom

2 layer board of 2.01 x 1.51 inches (51.0 x 38.2 mm)
Uploaded: December 16, 2017
Shared: December 16, 2017
Total Price: $15.10

uBlox LEA-5T Timing GPS Breakout V1.0

uBlox LEA-5T Timing GPS Breakout V1.0

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ElfPi.zip

author: KA7FTP
Top
Bottom

2 layer board of 2.57 x 2.23 inches (65.2 x 56.6 mm)
Uploaded: November 21, 2017
Shared: December 16, 2017
Total Price: $28.55

Raspberry Pi3 Elf Membership Card Daughter Board

Raspberry Pi3 Elf Membership Card Daughter Board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2026 OSH Park, LLC | Privacy