Multi Frequency Oscillator
author: skum
2 layer board of 0.92 x 0.61 inches (23.4 x 15.4 mm)
Uploaded:
August 13, 2018
Shared:
September 16, 2018
Total Price:
$2.75
A revision B that is physically smaller, but functionally identical here
Idea taken from https://nfggames.com/forum2/index.php?topic=5744.0 but since I sometimes needed to switch two frequencies, I made this. Example where it is usable, i…
Show full description
A revision B that is physically smaller, but functionally identical here
Idea taken from https://nfggames.com/forum2/index.php?topic=5744.0 but since I sometimes needed to switch two frequencies, I made this. Example where it is usable, i…
Show full description
Smoother 1.0
author: Otmar
2 layer board of 2.92 x 1.34 inches (74.0 x 34.0 mm)
Uploaded:
September 16, 2018
Shared:
September 16, 2018
Total Price:
$19.50
Automotive Teensy 3.6 with Dual CAN and prototype options. Untested. Free for non commercial use, Contact Otmar for other rights. Schematic, BOM and KiCad 5.0 source files at: http://cafeelectric.com/sharedProjects/smootherArchivev1_0/
Automotive Teensy 3.6 with Dual CAN and prototype options. Untested. Free for non commercial use, Contact Otmar for other rights. Schematic, BOM and KiCad 5.0 source files at: http://cafeelectric.com/sharedProjects/smootherArchivev1_0/
Gameboy Zero Tactile Pad (EXPERIMENTAL)
author: hernan43
2 layer board of 0.56 x 0.61 inches (14.2 x 15.5 mm)
Uploaded:
September 15, 2018
Shared:
September 15, 2018
Total Price:
$1.70
This is my feeble attempt at making back button pads for a Gameboy Zero Build.
My thinking was to make something that would work for both a tactile button or a membrane style button setup.
If you are using a tactile switch/button you will need to insulate it from the pad.
Also I have no …
Show full description
This is my feeble attempt at making back button pads for a Gameboy Zero Build.
My thinking was to make something that would work for both a tactile button or a membrane style button setup.
If you are using a tactile switch/button you will need to insulate it from the pad.
Also I have no …
Show full description
4P4C RJ11 Modular Jack Breakout
author: mozzwald
2 layer board of 1.58 x 0.87 inches (40.2 x 22.2 mm)
Uploaded:
September 15, 2018
Shared:
September 15, 2018
Total Price:
$6.85
4P4C RJ11 vertical modular jack breakout board (Molex 95003). M2.5 mounting holes spaced 30mm apart. Can be panel mounted with 12mm standoffs.
4P4C RJ11 vertical modular jack breakout board (Molex 95003). M2.5 mounting holes spaced 30mm apart. Can be panel mounted with 12mm standoffs.
Indra Power Distribution Board
author: colin-pm
2 layer board of 3.94 x 3.94 inches (100.0 x 100.0 mm)
Uploaded:
September 14, 2018
Shared:
September 14, 2018
Total Price:
$77.50
Second revision for Indra PDB. Board interfaces a raspberry Pi with 12v status LEDs, panel switches, 12v power input, and motorized linear ball valve.
Second revision for Indra PDB. Board interfaces a raspberry Pi with 12v status LEDs, panel switches, 12v power input, and motorized linear ball valve.
