Shared Projects

Shared Projects

J007634_FPGA_BREAKOUT_FRONT_REVA

author: jET_Janelia_HHMI
Top
Bottom

2 layer board of 15.25 x 1.70 inches (387.4 x 43.2 mm)
Uploaded: September 17, 2018
Shared: February 05, 2020
Total Price: $129.70

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

oso ring

author: steenl
Top
Bottom

2 layer board of 1.11 x 0.40 inches (28.1 x 10.2 mm)
Uploaded: November 07, 2014
Shared: February 05, 2020
Total Price: $2.20

BLE SOC[pls ignore silkscrn err, hope .drl file OK]

BLE SOC[pls ignore silkscrn err, hope .drl file OK]

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

BeeCorder1p0

author: steenl
Top
Bottom

2 layer board of 1.90 x 0.99 inches (48.3 x 25.1 mm)
Uploaded: February 05, 2020
Shared: February 05, 2020
Total Price: $9.35

Beehive temp/humidity/weight with ESP8266 12F

Beehive temp/humidity/weight with ESP8266 12F

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DIY TINY USB HUB - 4 PORT

author: RETROCUTION
Top
Bottom

2 layer board of 0.92 x 0.79 inches (23.2 x 19.9 mm)
Uploaded: February 05, 2020
Shared: February 05, 2020
Total Price: $3.55

Very simple USB hub built on the FE1.1S. You can use this for Raspberry Pi projects or anywhere where you need some extra USB ports in a tight space. Only requires 6 components. For more information see my blog at Retrocution.com

NON-COMMERCIAL USE – commercial sale of this PCB is prohibited….

Show full description

Very simple USB hub built on the FE1.1S. You can use this for Raspberry Pi projects or anywhere where you need some extra USB ports in a tight space. Only requires 6 components. For more information see my blog at Retrocution.com

NON-COMMERCIAL USE – commercial sale of this PCB is prohibited….

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DIY TINY USB HUB - 2 PORT

author: RETROCUTION
Top
Bottom

2 layer board of 0.92 x 0.65 inches (23.2 x 16.5 mm)
Uploaded: February 05, 2020
Shared: February 05, 2020
Total Price: $2.95

Very simple USB hub built on the FE1.1S. You can use this for Raspberry Pi projects or anywhere where you need some extra USB ports in a tight space. Only requires 6 components. For more information see my blog at Retrocution.com

NON-COMMERCIAL USE – commercial sale of this PCB is prohibited….

Show full description

Very simple USB hub built on the FE1.1S. You can use this for Raspberry Pi projects or anywhere where you need some extra USB ports in a tight space. Only requires 6 components. For more information see my blog at Retrocution.com

NON-COMMERCIAL USE – commercial sale of this PCB is prohibited….

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MT25QLBreakout

author: svcguy
Top
Bottom

2 layer board of 0.80 x 0.40 inches (20.4 x 10.2 mm)
Uploaded: February 01, 2020
Shared: February 05, 2020
Total Price: $1.60

A breakout board for an MT25QL in 8WPDFN with a connector on the bottom for replacing an SOIC8 flash chip

A breakout board for an MT25QL in 8WPDFN with a connector on the bottom for replacing an SOIC8 flash chip

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DIY TINY USB HUB - 2 PORT

author: RETROCUTION
Top
Bottom

2 layer board of 0.92 x 0.65 inches (23.2 x 16.5 mm)
Uploaded: February 05, 2020
Shared: February 05, 2020
Total Price: $2.95

Very simple USB hub built on the FE1.1S. You can use this for Raspberry Pi projects or anywhere where you need some extra USB ports in a tight space. Only requires 6 cheap components. For more information see my blog at Retrocution.com

Very simple USB hub built on the FE1.1S. You can use this for Raspberry Pi projects or anywhere where you need some extra USB ports in a tight space. Only requires 6 cheap components. For more information see my blog at Retrocution.com

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DIY TINY USB HUB - 4 PORT

author: RETROCUTION
Top
Bottom

2 layer board of 0.92 x 0.79 inches (23.2 x 19.9 mm)
Uploaded: February 05, 2020
Shared: February 05, 2020
Total Price: $3.55

Very simple USB hub built on the FE1.1S. You can use this for Raspberry Pi projects or anywhere where you need some extra USB ports in a tight space. Only requires 6 cheap components. For more information see my blog at Retrocution.com

Very simple USB hub built on the FE1.1S. You can use this for Raspberry Pi projects or anywhere where you need some extra USB ports in a tight space. Only requires 6 cheap components. For more information see my blog at Retrocution.com

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

V1

author: dunk8888
Top
Bottom

2 layer board of 5.12 x 2.36 inches (130.0 x 60.0 mm)
Uploaded: February 13, 2019
Shared: February 05, 2020
Total Price: $60.45

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DIY TINY USB HUB - 4 PORT

author: RETROCUTION
Top
Bottom

2 layer board of 0.92 x 0.79 inches (23.2 x 19.9 mm)
Uploaded: February 05, 2020
Shared: February 05, 2020
Total Price: $3.55

Very simple USB hub built on the FE1.1S. You can use this for Raspberry Pi projects or anywhere where you need some extra USB ports in a tight space. Only requires 6 cheap components. For more information see my blog at Retrocution.com

Very simple USB hub built on the FE1.1S. You can use this for Raspberry Pi projects or anywhere where you need some extra USB ports in a tight space. Only requires 6 cheap components. For more information see my blog at Retrocution.com

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DIY TINY USB HUB - 2 PORT

author: RETROCUTION
Top
Bottom

2 layer board of 0.92 x 0.65 inches (23.2 x 16.5 mm)
Uploaded: February 05, 2020
Shared: February 05, 2020
Total Price: $2.95

Very simple USB hub built on the FE1.1S. You can use this for Raspberry Pi projects or anywhere where you need some extra USB ports in a tight space. Only requires 6 cheap components. For more information see my blog at Retrocution.com

Very simple USB hub built on the FE1.1S. You can use this for Raspberry Pi projects or anywhere where you need some extra USB ports in a tight space. Only requires 6 cheap components. For more information see my blog at Retrocution.com

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ARINC 429 front end

author: sjm
Top
Bottom

2 layer board of 0.74 x 0.41 inches (18.7 x 10.3 mm)
Uploaded: February 04, 2020
Shared: February 05, 2020
Total Price: $1.45

ARINC 429 analog front end using discrete components and TLV3202

ARINC 429 analog front end using discrete components and TLV3202

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Alphred_Peripheral_Schematic

author: bryanbed
Top
Bottom

2 layer board of 2.81 x 2.12 inches (71.4 x 53.8 mm)
Uploaded: February 04, 2020
Shared: February 04, 2020
Total Price: $29.70

Peripheral interface board for robotic application.

Peripheral interface board for robotic application.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

etl_service_hybrid_thermal_mockup

author: caleb_fangmeier
Top
Bottom

4 layer board of 9.85 x 1.07 inches (250.1 x 27.0 mm)
Uploaded: February 03, 2020
Shared: February 04, 2020
Total Price: $104.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FPC_Touch_Screen_Switcher_v2_0

author: Edison517
Top
Bottom

2 layer board of 1.80 x 1.17 inches (45.8 x 29.6 mm)
Uploaded: February 04, 2020
Shared: February 04, 2020
Total Price: $10.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

rl78_breakout

author: mlamun
Top
Bottom

2 layer board of 2.17 x 2.62 inches (55.2 x 66.6 mm)
Uploaded: February 04, 2020
Shared: February 04, 2020
Total Price: $28.45

Renesas RL78/F14 breakout, CW308 victim board

Renesas RL78/F14 breakout, CW308 victim board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LED segment test

author: nmk456
Top
Bottom

2 layer board of 2.25 x 0.40 inches (57.2 x 10.2 mm)
Uploaded: February 04, 2020
Shared: February 04, 2020
Total Price: $4.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DDS Filter II

author: TheSpeakerGuy
Top
Bottom

2 layer board of 2.40 x 1.60 inches (61.0 x 40.7 mm)
Uploaded: February 04, 2020
Shared: February 04, 2020
Total Price: $19.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

adapter

author: Netstar77
Top
Bottom

2 layer board of 2.35 x 0.70 inches (59.7 x 17.8 mm)
Uploaded: February 03, 2020
Shared: February 04, 2020
Total Price: $8.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Two-Res-Filtered

author: ivelkovsky
Top
Bottom

2 layer board of 1.61 x 1.76 inches (40.8 x 44.6 mm)
Uploaded: February 03, 2020
Shared: February 03, 2020
Total Price: $14.10

Two resonator test board with filter pads and separate grounds (with solder jumpers to test difference.

Two resonator test board with filter pads and separate grounds (with solder jumpers to test difference.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy