Lume X1 - KR1 - TriLED PCB - Rev A
2 layer board of 0.81 x 0.81 inches (20.5 x 20.5 mm)
Uploaded:
January 4th 2021
Shared:
March 27th 2021
Total Price:
$3.25
Auxiliary Tri-LED Board for KR1, designed for use with 7070 LEDs like the XHP70.2 or GT-FC40 or similar; designed for use with the Lume X1 LED driver. 20.45mm diameter, similar to Noctigon MCPCBs.
Recommended 0.8mm PCB thickness, 0402 resistors, 0402 LEDs.
www.loneoceans.com/labs/ Rev A …
Show full description
Auxiliary Tri-LED Board for KR1, designed for use with 7070 LEDs like the XHP70.2 or GT-FC40 or similar; designed for use with the Lume X1 LED driver. 20.45mm diameter, similar to Noctigon MCPCBs.
Recommended 0.8mm PCB thickness, 0402 resistors, 0402 LEDs.
www.loneoceans.com/labs/ Rev A …
Show full description
lume1 for FW3x - Rev B Fabrication (NFET)
2 layer board of 0.86 x 0.86 inches (21.7 x 21.7 mm)
Uploaded:
April 22nd 2020
Shared:
January 3rd 2021
Total Price:
$3.65
Lume 1 LED Driver for FW3x Flashlight Revision B (NFET) for Fabrication (first release) 3A Constant Current Buck Boost with FET loneoceans.com/labs/
Lume 1 LED Driver for FW3x Flashlight Revision B (NFET) for Fabrication (first release) 3A Constant Current Buck Boost with FET loneoceans.com/labs/
lume FW3x Aux RGB-LED Board Rev B
2 layer board of 0.79 x 0.79 inches (20.0 x 20.1 mm)
Uploaded:
August 21st 2020
Shared:
August 21st 2020
Total Price:
$3.10
Auxiliary RGB LED Board for FW3x Flashlights, designed for 10507/511 or similar Carclo Optics. Six Common-Cathode RGB LEDs wired with R, G, B in parallel; works with lume1-fw3x LED driver with Anduril.
Rev B is identical to Rev A but improves solder pad spacing for easier wire soldering.
R…
Show full description
Auxiliary RGB LED Board for FW3x Flashlights, designed for 10507/511 or similar Carclo Optics. Six Common-Cathode RGB LEDs wired with R, G, B in parallel; works with lume1-fw3x LED driver with Anduril.
Rev B is identical to Rev A but improves solder pad spacing for easier wire soldering.
R…
Show full description
lume FW3x Aux RGB-LED Board Rev A
2 layer board of 0.79 x 0.79 inches (20.0 x 20.1 mm)
Uploaded:
May 4th 2020
Shared:
May 4th 2020
Total Price:
$3.10
Auxiliary RGB LED Board for FW3x Flashlights, designed for 10507/511 or similar Carclo Optics. Six Common-Cathode RGB LEDs wired with R, G, B in parallel; works with lume1-fw3x LED driver with Anduril.
Recommended 0.8mm PCB Thickness, 0402 Resistors, 1615 LEDs. LEDs to use: https://www.aliexpr…
Show full description
Auxiliary RGB LED Board for FW3x Flashlights, designed for 10507/511 or similar Carclo Optics. Six Common-Cathode RGB LEDs wired with R, G, B in parallel; works with lume1-fw3x LED driver with Anduril.
Recommended 0.8mm PCB Thickness, 0402 Resistors, 1615 LEDs. LEDs to use: https://www.aliexpr…
Show full description
lume FW3x Aux Tri-LED Board Rev B
2 layer board of 0.79 x 0.79 inches (20.0 x 20.0 mm)
Uploaded:
March 31st 2020
Shared:
April 27th 2020
Total Price:
$3.10
Auxiliary tri-LED Board for FW3x Flashlights, designed for 10507/511 or similar Carclo Optics. Three banks of LEDs wired in common cathode configuration, works with lume LED driver with Anduril.
Recommended 0.8mm PCB Thickness, 0402 Resistors, 0402 LEDs (0603 LEDs fit as well but more challen…
Show full description
Auxiliary tri-LED Board for FW3x Flashlights, designed for 10507/511 or similar Carclo Optics. Three banks of LEDs wired in common cathode configuration, works with lume LED driver with Anduril.
Recommended 0.8mm PCB Thickness, 0402 Resistors, 0402 LEDs (0603 LEDs fit as well but more challen…
Show full description
