Shared Projects

Shared Projects

2 layer 4 layer 6 layer
Filter PCB layers

SmartLEDShield_T4toT3Adapter_V1_20200518

author: Embedded-Creations
Top
Bottom

2 layer board of 1.40 x 1.06 inches (35.6 x 27.0 mm)
Uploaded: May 18, 2020
Shared: May 18, 2020
Total Price: $7.45

If you want to use a Teensy 4.0/4.1 with the SmartLED Shield for Teensy 3 (V4), this adapter lets you do it.

You'll need 2x 14-pin 0.1" headers, and 2x 14-pin 0.1" sockets.

Used to prototype the SmartLED Shield for Teensy 4, now [available on Crowd Supply](https://www.crowdsupply.com/pixelm…

Show full description

If you want to use a Teensy 4.0/4.1 with the SmartLED Shield for Teensy 3 (V4), this adapter lets you do it.

You'll need 2x 14-pin 0.1" headers, and 2x 14-pin 0.1" sockets.

Used to prototype the SmartLED Shield for Teensy 4, now [available on Crowd Supply](https://www.crowdsupply.com/pixelm…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

connect-o-rama microusb revB

author: mza
Top
Bottom

2 layer board of 0.78 x 0.37 inches (19.8 x 9.3 mm)
Uploaded: January 14, 2020
Shared: May 18, 2020
Total Price: $1.40

breaks out power pins from microusb through-hole vertical connector to some holes for 18 AWG wire

breaks out power pins from microusb through-hole vertical connector to some holes for 18 AWG wire

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

boj4 revA

author: mza
Top
Bottom

2 layer board of 1.30 x 0.93 inches (33.0 x 23.5 mm)
Uploaded: February 07, 2020
Shared: May 18, 2020
Total Price: $6.00

multifunction board for bridging lemo, sma, mmcs and bnc. fits in a pomona 3754 box if you drill some holes in it.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/boj4.revA.schematic.pdf>

multifunction board for bridging lemo, sma, mmcs and bnc. fits in a pomona 3754 box if you drill some holes in it.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/boj4.revA.schematic.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

photodiode readout revC

author: mza
Top
Bottom

2 layer board of 1.58 x 1.58 inches (40.0 x 40.0 mm)
Uploaded: February 11, 2020
Shared: May 18, 2020
Total Price: $12.40

30mm cage-system compatible board to position a photodiode (thorlabs fds015 or fds100) on the axis of the cage system, bias it (mini-fit jr 3 pos or mmcx) and bring the signal out on another mmcx connector

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/photodiode-readout.revC.schematic….

Show full description

30mm cage-system compatible board to position a photodiode (thorlabs fds015 or fds100) on the axis of the cage system, bias it (mini-fit jr 3 pos or mmcx) and bring the signal out on another mmcx connector

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/photodiode-readout.revC.schematic….

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

inverter revB

author: mza
Top
Bottom

2 layer board of 0.95 x 0.81 inches (24.0 x 20.5 mm)
Uploaded: February 20, 2020
Shared: May 18, 2020
Total Price: $3.80

Takes in a signal and inverts the polarity. Needs +/- 5V. LEMO-00 connectors for in and out.

Schematic: https://www.phys.hawaii.edu/~mza/PCB/misc/inverter.revB.schematic.pdf

Takes in a signal and inverts the polarity. Needs +/- 5V. LEMO-00 connectors for in and out.

Schematic: https://www.phys.hawaii.edu/~mza/PCB/misc/inverter.revB.schematic.pdf

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mini-fit jr fan rail revB

author: mza
Top
Bottom

2 layer board of 2.93 x 0.86 inches (74.5 x 21.8 mm)
Uploaded: February 29, 2020
Shared: May 18, 2020
Total Price: $12.55

fanout board for distributing power on mini-fit jr 3 pin connectors. includes polyfuses so that one fan failing doesn't bring down all of them.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/mini-fit-jr-fan-rail.revB.schematic.pdf>

fanout board for distributing power on mini-fit jr 3 pin connectors. includes polyfuses so that one fan failing doesn't bring down all of them.

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/misc/mini-fit-jr-fan-rail.revB.schematic.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

connect-o-rama mmcx revA

author: mza
Top
Bottom

2 layer board of 0.71 x 0.32 inches (18.0 x 8.0 mm)
Uploaded: December 27, 2019
Shared: May 18, 2020
Total Price: $1.10

breakout board for mmcx connector to holes for 18 AWG wire

breakout board for mmcx connector to holes for 18 AWG wire

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

connect-o-rama lemo revA

author: mza
Top
Bottom

2 layer board of 0.71 x 0.43 inches (18.0 x 10.9 mm)
Uploaded: December 27, 2019
Shared: May 18, 2020
Total Price: $1.50

breakout board for lemo connector to holes for 18 AWG wire

breakout board for lemo connector to holes for 18 AWG wire

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

connect-o-rama sma revA

author: mza
Top
Bottom

2 layer board of 0.73 x 0.49 inches (18.6 x 12.3 mm)
Uploaded: December 27, 2019
Shared: May 18, 2020
Total Price: $1.75

breakout board for sma connector to holes for 18 AWG wire

breakout board for sma connector to holes for 18 AWG wire

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

connect-o-rama 5.5mmOD revA

author: mza
Top
Bottom

2 layer board of 0.92 x 0.58 inches (23.5 x 14.8 mm)
Uploaded: December 30, 2019
Shared: May 18, 2020
Total Price: $2.65

breakout board for 5.5mm OD connector (male or female) to holes for 18 AWG wire

breakout board for 5.5mm OD connector (male or female) to holes for 18 AWG wire

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ammy revA

author: mza
Top
Bottom

4 layer board of 0.63 x 0.95 inches (16.0 x 24.0 mm)
Uploaded: December 30, 2019
Shared: May 18, 2020
Total Price: $5.90

inline current-sense amplifier board for positronic dragonfly04 connector (M-F)

inline current-sense amplifier board for positronic dragonfly04 connector (M-F)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

dragonfly04 rail revD

author: mza
Top
Bottom

4 layer board of 1.85 x 0.97 inches (47.0 x 24.5 mm)
Uploaded: January 03, 2020
Shared: May 18, 2020
Total Price: $17.80

4 way fanout board for power on a positronic dragonfly04 connector, along with current sense amplifiers to send a voltage proportional to the current on the 2 small gauge wires on the connector

4 way fanout board for power on a positronic dragonfly04 connector, along with current sense amplifiers to send a voltage proportional to the current on the 2 small gauge wires on the connector

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

reggie revC

author: mza
Top
Bottom

2 layer board of 1.03 x 0.85 inches (26.0 x 21.5 mm)
Uploaded: December 19, 2019
Shared: May 18, 2020
Total Price: $4.30

3A regulator (LT1764AEQ) board with in/out through holes for 18 AWG wire

3A regulator (LT1764AEQ) board with in/out through holes for 18 AWG wire

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

led-mount

author: mza
Top
Bottom

2 layer board of 0.36 x 0.36 inches (9.0 x 9.0 mm)
Uploaded: February 21, 2019
Shared: May 18, 2020
Total Price: $0.60

mounts a 1411 surface mount led on a 9mm diameter board

mounts a 1411 surface mount led on a 9mm diameter board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

althea revA'

author: mza
Top
Bottom

4 layer board of 1.58 x 1.58 inches (40.0 x 40.0 mm)
Uploaded: October 31, 2018
Shared: May 18, 2020
Total Price: $24.80

spartan6 lx9 FPGA board that is compatible with a 30mm cage system

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/althea/althea.revA'.schematic.pdf>

Diagram: <https://www.phys.hawaii.edu/~mza/PCB/althea/althea.revA'.diagram.pdf>

spartan6 lx9 FPGA board that is compatible with a 30mm cage system

Schematic: <https://www.phys.hawaii.edu/~mza/PCB/althea/althea.revA'.schematic.pdf>

Diagram: <https://www.phys.hawaii.edu/~mza/PCB/althea/althea.revA'.diagram.pdf>

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

little-amp-board revJ

author: mza
Top
Bottom

4 layer board of 1.57 x 0.55 inches (39.9 x 14.0 mm)
Uploaded: November 06, 2018
Shared: May 18, 2020
Total Price: $8.60

two-stage amplifier (LMH6629) board sma in/out. includes potentiometer/buffer amp for DC bias voltage

two-stage amplifier (LMH6629) board sma in/out. includes potentiometer/buffer amp for DC bias voltage

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

laser-driver revE

author: mza
Top
Bottom

2 layer board of 1.58 x 1.58 inches (40.0 x 40.0 mm)
Uploaded: September 15, 2018
Shared: May 18, 2020
Total Price: $12.40

drives a PECL copy of a TTL signal into a laser diode mounted in a 30mm cage system

drives a PECL copy of a TTL signal into a laser diode mounted in a 30mm cage system

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TTL-to-LVDS revA

author: mza
Top
Bottom

2 layer board of 1.09 x 1.10 inches (27.8 x 28.0 mm)
Uploaded: September 22, 2018
Shared: May 18, 2020
Total Price: $6.00

quick board for signal level/type conversion

quick board for signal level/type conversion

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

icestick-frequency-counter revB

author: mza
Top
Bottom

2 layer board of 4.49 x 1.48 inches (114.2 x 37.6 mm)
Uploaded: October 06, 2018
Shared: May 18, 2020
Total Price: $33.30

board plugs into an icestick and shows the frequency of the signal coming in on a 7 segment led display array. signal coming in is either from lemo connector or rj45 (7-8 pair)

board plugs into an icestick and shows the frequency of the signal coming in on a 7 segment led display array. signal coming in is either from lemo connector or rj45 (7-8 pair)

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

excelsys-interlock revB

author: mza
Top
Bottom

2 layer board of 0.77 x 0.61 inches (19.5 x 15.4 mm)
Uploaded: April 06, 2018
Shared: May 18, 2020
Total Price: $2.30

little board to help do something useful with the annoying little connector on the back of one of these useful power supplies. attach a lemo-00 cable to this and connect/disconnect a 50 Ohm terminator or relay to it to turn on/off the supply

little board to help do something useful with the annoying little connector on the back of one of these useful power supplies. attach a lemo-00 cable to this and connect/disconnect a 50 Ohm terminator or relay to it to turn on/off the supply

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy