Shared Projects

Shared Projects

2.5in HDD Stacking Bracket

author: SightUnseen
Top
Bottom

2 layer board of 3.94 x 0.98 inches (100.0 x 25.0 mm)
Uploaded: March 01, 2022
Shared: March 01, 2022
Total Price: $19.35

This is a bracket for vertically stacking 2x 2.5in HDDs/SSDs in PC cases where one drive is normally mounted via the bottom screw holes

2 boards required

This is a bracket for vertically stacking 2x 2.5in HDDs/SSDs in PC cases where one drive is normally mounted via the bottom screw holes

2 boards required

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

28699-A

author: mstroven
Top
Bottom

2 layer board of 2.50 x 1.00 inches (63.5 x 25.4 mm)
Uploaded: February 28, 2022
Shared: February 28, 2022
Total Price: $12.50

Serial to serial translator designed around NXP Kinetis KV10Z micro

Serial to serial translator designed around NXP Kinetis KV10Z micro

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FBCS_MPS R1.0

author: larter
Top
Bottom

4 layer board of 2.63 x 1.95 inches (66.7 x 49.5 mm)
Uploaded: February 28, 2022
Shared: February 28, 2022
Total Price: $51.20

FBCS MPS interface board R1.0

FBCS MPS interface board R1.0

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

40673X_schem

author: WA7MLH
Top
Bottom

2 layer board of 0.39 x 0.39 inches (9.8 x 9.8 mm)
Uploaded: February 26, 2022
Shared: February 28, 2022
Total Price: $0.70

40673 Si Dual Gate MOSFET footprint with BF998 WA7MLH

40673 Si Dual Gate MOSFET footprint with BF998 WA7MLH

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

encoder board

author: Luc
Top
Bottom

2 layer board of 0.80 x 1.06 inches (20.3 x 27.0 mm)
Uploaded: February 27, 2022
Shared: February 27, 2022
Total Price: $4.20

magnetic encoder board for hennkwell pz22gr9120r gearmotor first draft.. buyer beware

magnetic encoder board for hennkwell pz22gr9120r gearmotor first draft.. buyer beware

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Jacob Butcher 555 timer intro pcb

author: Jacob44
Top
Bottom

4 layer board of 1.60 x 1.60 inches (40.6 x 40.6 mm)
Uploaded: February 27, 2022
Shared: February 27, 2022
Total Price: $25.60

555 timer pcb intro project

555 timer pcb intro project

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mdb_hat_prototype

author: granfaloon
Top
Bottom

2 layer board of 2.55 x 2.19 inches (64.8 x 55.6 mm)
Uploaded: February 27, 2022
Shared: February 27, 2022
Total Price: $27.85

Prototype of MDB Hat for Raspberry Pi

Prototype of MDB Hat for Raspberry Pi

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

pcb - F

author: fadi.shamaan
Top
Bottom

2 layer board of 2.30 x 1.40 inches (58.4 x 35.6 mm)
Uploaded: February 17, 2022
Shared: February 27, 2022
Total Price: $16.05

intro

intro

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

WiSUNTest.kicad_pcb

author: mharvill23
Top
Bottom

2 layer board of 2.30 x 3.73 inches (58.5 x 94.8 mm)
Uploaded: February 26, 2022
Shared: February 26, 2022
Total Price: $42.95

PCB for Human Activity Detector. Mounts on TI LP-CC13XX Launchpads.

PCB for Human Activity Detector. Mounts on TI LP-CC13XX Launchpads.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

myDewControllerPro

author: danb35
Top
Bottom

2 layer board of 3.94 x 3.15 inches (100.0 x 80.0 mm)
Uploaded: February 26, 2022
Shared: February 26, 2022
Total Price: $62.00

DIY, Arduino-based dew heater controller. See https://sourceforge.net/projects/arduinonanodewcontrollerpro/ and https://github.com/danb35/myDewControllerPro-PCB

DIY, Arduino-based dew heater controller. See https://sourceforge.net/projects/arduinonanodewcontrollerpro/ and https://github.com/danb35/myDewControllerPro-PCB

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

V-SRC/V-GRAD scaling

author: DanielOgas
Top
Bottom

2 layer board of 3.96 x 3.94 inches (100.7 x 100.0 mm)
Uploaded: February 25, 2022
Shared: February 25, 2022
Total Price: $78.05

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

VL6180X.FPC.v01

author: PeskyProducts
Top
Bottom

4 layer board of 0.37 x 0.25 inches (9.3 x 6.4 mm)
Uploaded: February 25, 2022
Shared: February 25, 2022
Total Price: $0.90

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

LED_PCB v40_2021-02-26

author: maruska
Top
Bottom

2 layer board of 2.71 x 0.91 inches (68.9 x 23.1 mm)
Uploaded: February 26, 2021
Shared: February 25, 2022
Total Price: $12.30

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

mbed_poe.kicad_pcb

author: sjalloq
Top
Bottom

2 layer board of 3.85 x 2.17 inches (97.9 x 55.1 mm)
Uploaded: October 21, 2019
Shared: February 25, 2022
Total Price: $41.75

An mbed LPC1768 breakout board with PoE and PMOD and Dali connectors.

An mbed LPC1768 breakout board with PoE and PMOD and Dali connectors.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

FilterSwitchTest1.kicad_pcb

author: xdmattz
Top
Bottom

4 layer board of 2.50 x 5.50 inches (63.5 x 139.7 mm)
Uploaded: February 25, 2022
Shared: February 25, 2022
Total Price: $137.50

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Broadband Amplifier Board (003.B0)

author: SiGe
Top
Bottom

4 layer board of 1.32 x 0.98 inches (33.5 x 24.9 mm)
Uploaded: February 24, 2022
Shared: February 24, 2022
Total Price: $12.90

This board can be used for PHA-1+ and PGA-103+ amplifiers. It uses a broad-band coil craft bias.

This board can be used for PHA-1+ and PGA-103+ amplifiers. It uses a broad-band coil craft bias.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SG4 Rev C

author: Bill
Top
Bottom

2 layer board of 3.75 x 2.50 inches (95.2 x 63.5 mm)
Uploaded: February 24, 2022
Shared: February 24, 2022
Total Price: $46.85

Rev C U4 layout for MCP101-450HI/TO

Rev C U4 layout for MCP101-450HI/TO

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ultrasonic Mic Breakout

author: ZapWizard
Top
Bottom

2 layer board of 1.03 x 1.03 inches (26.1 x 26.1 mm)
Uploaded: December 31, 2021
Shared: February 23, 2022
Total Price: $5.25

SPH0641LU4H-1 breakout board

SPH0641LU4H-1 breakout board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

CAN2a_MCP2515_Breakout_v1

author: Javalin
Top
Bottom

2 layer board of 1.69 x 1.39 inches (42.9 x 35.3 mm)
Uploaded: February 23, 2022
Shared: February 23, 2022
Total Price: $11.70

Breakout to allow MCP2515 to interface with low speed (<125kbps) CAN using the TJA1054 transceiver Needs a compatible 8mhz crystal (see TJA1054 datasheet) and various 0805 capacitors and resistors, along with the two IC's. Headers for CAN bus via a screw terminal (3.5mm pitch) or two pin wire j…

Show full description

Breakout to allow MCP2515 to interface with low speed (<125kbps) CAN using the TJA1054 transceiver Needs a compatible 8mhz crystal (see TJA1054 datasheet) and various 0805 capacitors and resistors, along with the two IC's. Headers for CAN bus via a screw terminal (3.5mm pitch) or two pin wire j…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Tim Jager

author: DMC
Top
Bottom

2 layer board of 1.22 x 0.83 inches (31.0 x 21.0 mm)
Uploaded: January 04, 2022
Shared: February 23, 2022
Total Price: $5.05

minisimplicity

minisimplicity

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy