Shared Projects

Shared Projects

u shaped board

author: seth.powers
Top
Bottom

2 layer board of 1.28 x 1.81 inches (32.4 x 46.0 mm)
Uploaded: September 09, 2022
Shared: September 09, 2022
Total Price: $11.55

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HD_64_Breakout_Thin_v3_2022-09-07

author: radudarie
Top
Bottom

2 layer board of 4.45 x 3.60 inches (113.1 x 91.5 mm)
Uploaded: September 07, 2022
Shared: September 09, 2022
Total Price: $80.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Muffsy gerbers

author: CriticalMass
Top
Bottom

2 layer board of 3.31 x 2.70 inches (84.0 x 68.6 mm)
Uploaded: September 08, 2022
Shared: September 08, 2022
Total Price: $44.60

Muffsy Gerbers Renamed and massaged

Muffsy Gerbers Renamed and massaged

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

wiicam

author: Prozac4545
Top
Bottom

2 layer board of 1.05 x 0.45 inches (26.7 x 11.4 mm)
Uploaded: May 18, 2022
Shared: September 08, 2022
Total Price: $2.35

https://github.com/pjbunyan/Liightgun

Oscillator: https://uk.rs-online.com/web/p/crystal-oscillators/6719700

10uF capacitors: https://uk.rs-online.com/web/p/mlccs-multilayer-ceramic-capacitors/7661034

10nF capacitors: https://uk.rs-online.com/web/p/mlccs-multilayer-ceramic-capacitors/4766041 …

Show full description

https://github.com/pjbunyan/Liightgun

Oscillator: https://uk.rs-online.com/web/p/crystal-oscillators/6719700

10uF capacitors: https://uk.rs-online.com/web/p/mlccs-multilayer-ceramic-capacitors/7661034

10nF capacitors: https://uk.rs-online.com/web/p/mlccs-multilayer-ceramic-capacitors/4766041 …

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Flying lead pic v4

author: seth.powers
Top
Bottom

2 layer board of 1.78 x 2.38 inches (45.2 x 60.4 mm)
Uploaded: September 08, 2022
Shared: September 08, 2022
Total Price: $21.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Flying lead pic v5

author: seth.powers
Top
Bottom

2 layer board of 1.78 x 2.38 inches (45.2 x 60.4 mm)
Uploaded: September 08, 2022
Shared: September 08, 2022
Total Price: $21.10

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Simon's 4305AdapterRev1

author: GratefulEight
Top
Bottom

2 layer board of 2.08 x 2.06 inches (52.9 x 52.4 mm)
Uploaded: September 07, 2022
Shared: September 08, 2022
Total Price: $21.45

Many thanks to Simon K of GroupDIY for the initial Gerbers for this adapter board. Will make a THAT Corp 4305 and a couple Dual OpAmps work in a circuit originally designed for the 4301.

Many thanks to Simon K of GroupDIY for the initial Gerbers for this adapter board. Will make a THAT Corp 4305 and a couple Dual OpAmps work in a circuit originally designed for the 4301.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MEGA BEEPER PRO

author: jstanley0
Top
Bottom

2 layer board of 2.03 x 2.15 inches (51.5 x 54.7 mm)
Uploaded: February 24, 2021
Shared: September 08, 2022
Total Price: $21.80

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

astro-timer-smt

author: jstanley0
Top
Bottom

2 layer board of 2.59 x 1.63 inches (65.9 x 41.4 mm)
Uploaded: March 15, 2021
Shared: September 08, 2022
Total Price: $21.15

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Music Box v0.1

author: jstanley0
Top
Bottom

2 layer board of 1.98 x 1.98 inches (50.4 x 50.4 mm)
Uploaded: February 15, 2021
Shared: September 08, 2022
Total Price: $19.65

Music player featuring TI SN76489 and some blinkenlights

https://github.com/jstanley0/music-box

Music player featuring TI SN76489 and some blinkenlights

https://github.com/jstanley0/music-box

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Headlamp driver

author: jstanley0
Top
Bottom

2 layer board of 1.38 x 0.52 inches (35.1 x 13.2 mm)
Uploaded: September 08, 2022
Shared: September 08, 2022
Total Price: $3.55

the headlamp I bought from amazon doesn't have enough brightness control and it makes me cycle through blinding and blinky modes to turn it off. This Will Not Do. here is a simple control board using ATtiny85

the headlamp I bought from amazon doesn't have enough brightness control and it makes me cycle through blinding and blinky modes to turn it off. This Will Not Do. here is a simple control board using ATtiny85

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

jst smh bat charger

author: ElectroMage
Top
Bottom

2 layer board of 0.95 x 0.64 inches (24.1 x 16.3 mm)
Uploaded: June 03, 2022
Shared: September 07, 2022
Total Price: $3.00

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

jst smh 4s pack

author: ElectroMage
Top
Bottom

2 layer board of 0.95 x 0.48 inches (24.1 x 12.1 mm)
Uploaded: June 03, 2022
Shared: September 07, 2022
Total Price: $2.25

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

connect-o-rama microfit3mm revA

author: mza
Top
Bottom

2 layer board of 0.82 x 0.33 inches (20.9 x 8.5 mm)
Uploaded: September 07, 2022
Shared: September 07, 2022
Total Price: $1.35

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

IT1335-900

author: BoringNorCalLogin
Top
Bottom

4 layer board of 5.27 x 3.02 inches (134.0 x 76.7 mm)
Uploaded: September 06, 2022
Shared: September 06, 2022
Total Price: $159.20

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TS850-DCDC copy

author: evilxyzzy
Top
Bottom

2 layer board of 1.20 x 0.80 inches (30.5 x 20.3 mm)
Uploaded: March 25, 2014
Shared: September 06, 2022
Total Price: $4.80

TS850 DCDC Retrofit Design by OZ1BXM. Quick layout by me ( K6AET )

OZ1BXM's page this is based on https://www.oz1bxm.dk/TS850/ts850-repair.html

TS850 DCDC Retrofit Design by OZ1BXM. Quick layout by me ( K6AET )

OZ1BXM's page this is based on https://www.oz1bxm.dk/TS850/ts850-repair.html

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

vna_jig v0.2

author: kamocat
Top
Bottom

2 layer board of 1.00 x 0.50 inches (25.4 x 12.8 mm)
Uploaded: April 09, 2021
Shared: September 06, 2022
Total Price: $2.50

Test standard jig for vector network analyzer VNA nanoVNA RF filter complex impedance

Test standard jig for vector network analyzer VNA nanoVNA RF filter complex impedance

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

NRF_Mini_BreakoutV1

author: guser210
Top
Bottom

2 layer board of 0.80 x 0.70 inches (20.4 x 17.9 mm)
Uploaded: July 05, 2022
Shared: September 06, 2022
Total Price: $2.80

Generic breakout board for MINI NRF24L01+

guserNRF

Generic breakout board for MINI NRF24L01+

guserNRF

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mini_NRF_Pico v1

author: guser210
Top
Bottom

2 layer board of 0.70 x 0.74 inches (17.9 x 18.8 mm)
Uploaded: July 13, 2022
Shared: September 06, 2022
Total Price: $2.60

Breakout board is for the Mini NRF24L01+ and matches the pico pin out.

guserNRF

Breakout board is for the Mini NRF24L01+ and matches the pico pin out.

guserNRF

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

HeavyWingV1

author: GamingNJncos
Top
Bottom

2 layer board of 2.39 x 1.16 inches (60.6 x 29.5 mm)
Uploaded: July 03, 2021
Shared: September 04, 2022
Total Price: $13.85

Initial prototype for BLE-Saturn-3D BOM: 1x Adafruit Feather Huzzah32 1x HiLetgo GY-521 Tilt Sensor (optional) 1x OLED 128X64 SSD1306 (optional)

Requires Adafruit Feather Huzzah32 which provides the lipo charging circuit and ESP32D for bluetooth functions. This is the minimum needed fo…

Show full description

Initial prototype for BLE-Saturn-3D BOM: 1x Adafruit Feather Huzzah32 1x HiLetgo GY-521 Tilt Sensor (optional) 1x OLED 128X64 SSD1306 (optional)

Requires Adafruit Feather Huzzah32 which provides the lipo charging circuit and ESP32D for bluetooth functions. This is the minimum needed fo…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy