Serial LCD
author: deisterhold
2 layer board of 2.01 x 1.61 inches (51.0 x 40.9 mm)
Uploaded:
February 23, 2014
Shared:
February 23, 2014
Total Price:
$16.15
Shift Register LCD with ATtiny85 More Info @ <https://github.com/deisterhold/Serial-LCD/>
Shift Register LCD with ATtiny85 More Info @ <https://github.com/deisterhold/Serial-LCD/>
USBtoROScon
author: USBtoROS_Connector
2 layer board of 0.84 x 1.47 inches (21.2 x 37.3 mm)
Uploaded:
October 08, 2013
Shared:
February 21, 2014
Total Price:
$6.10
Connector converter for LVDS
Connector converter for LVDS
BLF Tiny12
author: Mattaus
2 layer board of 0.48 x 0.48 inches (12.1 x 12.1 mm)
Uploaded:
February 21, 2014
Shared:
February 21, 2014
Total Price:
$1.10
12mm Nanjg 105C compatible LED/flashlight driver.
Diode D1 is a BAT54. C1 is 10 uF. Resistors are 19.1K and 4.7K, 1% Regulator chips are AMC7135 Processor is ATTINY13 or similar LED connects to the + and – holes.
Outer ring is ground. Battery plus connects to + from the reverse side. …
Show full description
12mm Nanjg 105C compatible LED/flashlight driver.
Diode D1 is a BAT54. C1 is 10 uF. Resistors are 19.1K and 4.7K, 1% Regulator chips are AMC7135 Processor is ATTINY13 or similar LED connects to the + and – holes.
Outer ring is ground. Battery plus connects to + from the reverse side. …
Show full description
LCD Shift Register Controller
author: dag10
2 layer board of 1.73 x 1.50 inches (44.0 x 38.1 mm)
Uploaded:
October 27, 2013
Shared:
February 20, 2014
Total Price:
$13.00
Control a HD44780-based LCD with a shift register. Also has a trimpot for contrast.
Control a HD44780-based LCD with a shift register. Also has a trimpot for contrast.
Motor Controller
author: DarrenP
2 layer board of 3.14 x 2.70 inches (79.7 x 68.6 mm)
Uploaded:
February 20, 2014
Shared:
February 20, 2014
Total Price:
$42.35
A board to control up to 6 motors and 6 sensors. Will drive up to 6 standard DC motors, with a single sensor. Uses an arduino for control.
For PCB and other files:
https://github.com/dpoulson/drinks_dispenser
For more info:
http://www.22balmoralroad.net/wordpress/?cat=122
A board to control up to 6 motors and 6 sensors. Will drive up to 6 standard DC motors, with a single sensor. Uses an arduino for control.
For PCB and other files:
https://github.com/dpoulson/drinks_dispenser
For more info:
http://www.22balmoralroad.net/wordpress/?cat=122
Voltage regulator v0.1
author: NsN
2 layer board of 0.41 x 0.73 inches (10.5 x 18.5 mm)
Uploaded:
January 30, 2014
Shared:
February 20, 2014
Total Price:
$1.50
A small pwm controlled adjustable voltage regulator built from transistors. Only useful for low voltages
A small pwm controlled adjustable voltage regulator built from transistors. Only useful for low voltages
ABC
author: Jamieson
2 layer board of 1.50 x 0.75 inches (38.1 x 19.1 mm)
Uploaded:
February 19, 2014
Shared:
February 19, 2014
Total Price:
$5.60
Automatic Blind Controller. Based on LPC812 Cortex-M0+. The micro wakes up, senses light via CDS photocell and controls an RC servo installed in Venetian blinds. Includes pushbutton and RGB led. Designed for standby current of < 200uA.
Automatic Blind Controller. Based on LPC812 Cortex-M0+. The micro wakes up, senses light via CDS photocell and controls an RC servo installed in Venetian blinds. Includes pushbutton and RGB led. Designed for standby current of < 200uA.
mono/stereo/splitter adapter
author: icenyne
2 layer board of 1.18 x 0.83 inches (30.0 x 21.0 mm)
Uploaded:
February 18, 2014
Shared:
February 19, 2014
Total Price:
$4.85
mono/stereo mic/headphone adapter for camcorder
mono/stereo mic/headphone adapter for camcorder
USB Li-Poly / Li-Ion battery charger
author: microbug
2 layer board of 1.10 x 0.51 inches (27.9 x 12.9 mm)
Uploaded:
January 18, 2014
Shared:
February 19, 2014
Total Price:
$2.75
A small, bare-bones lithium battery charge controller that runs from a USB port (or any power supply from 4.5V to 6V).
Schematic and PCB layouts are on Upverter here.
More information and contact details c…
Show full description
A small, bare-bones lithium battery charge controller that runs from a USB port (or any power supply from 4.5V to 6V).
Schematic and PCB layouts are on Upverter here.
More information and contact details c…
Show full description
