AVR I2C LCD for RIG RX2
author: goboxgizmos
2 layer board of 2.83 x 2.42 inches (71.8 x 61.6 mm)
Uploaded:
June 13, 2014
Shared:
June 13, 2014
Total Price:
$34.20
Still working on this.
In short it takes the output from the RX2 that would normally drive the 7 segment LED channel display and converts it to LCD.
It also doubles as a signal meter too thus bringing everything together in a single display device.
It can also switch a preamp (or other d…
Show full description
Still working on this.
In short it takes the output from the RX2 that would normally drive the 7 segment LED channel display and converts it to LCD.
It also doubles as a signal meter too thus bringing everything together in a single display device.
It can also switch a preamp (or other d…
Show full description
dmxftdi
author: AndrewLindsay
2 layer board of 1.14 x 2.00 inches (28.9 x 50.8 mm)
Uploaded:
April 08, 2014
Shared:
June 13, 2014
Total Price:
$11.35
ftdi to dmx adapter open dmx format
ftdi to dmx adapter open dmx format
Arduino DMX Receiver Shield
author: AndrewLindsay
2 layer board of 2.75 x 2.11 inches (69.9 x 53.5 mm)
Uploaded:
June 13, 2014
Shared:
June 13, 2014
Total Price:
$28.95
DMX Receiver Shield
DMX Receiver Shield
mr_radar r0
author: jtklein
4 layer board of 2.76 x 1.70 inches (70.1 x 43.2 mm)
Uploaded:
June 13, 2014
Shared:
June 13, 2014
Total Price:
$46.80
5.8 GHz fmcw radar (currently untested)
hardware files and documentation at: https://github.com/loxodes/mr_radar
5.8 GHz fmcw radar (currently untested)
hardware files and documentation at: https://github.com/loxodes/mr_radar
ATtami
author: TelAvivMakers
2 layer board of 0.90 x 0.90 inches (22.8 x 22.9 mm)
Uploaded:
June 13, 2014
Shared:
June 13, 2014
Total Price:
$4.00
a cheap ATtiny85 based dev board
==this ver is missing some silkscreen==
git repo for latest
a cheap ATtiny85 based dev board
==this ver is missing some silkscreen==
git repo for latest
TangoLogger-1.3
author: SuperDuperTango
2 layer board of 4.01 x 2.11 inches (101.8 x 53.5 mm)
Uploaded:
February 08, 2014
Shared:
June 13, 2014
Total Price:
$42.20
TangoLogger Power, WiFly, & Connector board for Arduino Mega
TangoLogger Power, WiFly, & Connector board for Arduino Mega
Mini 7 Segment Arduino Clock
author: goboxgizmos
2 layer board of 1.97 x 1.57 inches (50.0 x 39.8 mm)
Uploaded:
June 11, 2014
Shared:
June 11, 2014
Total Price:
$15.40
Barebones Arduino V3
author: goboxgizmos
2 layer board of 2.01 x 1.11 inches (51.0 x 28.1 mm)
Uploaded:
June 11, 2014
Shared:
June 11, 2014
Total Price:
$11.10
ADSB PIC Decoder by Sprut - SMD
author: goboxgizmos
2 layer board of 1.59 x 1.55 inches (40.3 x 39.4 mm)
Uploaded:
June 11, 2014
Shared:
June 11, 2014
Total Price:
$12.30
ADSB PIC Decoder by Sprut
author: goboxgizmos
2 layer board of 2.09 x 2.05 inches (53.0 x 52.1 mm)
Uploaded:
June 11, 2014
Shared:
June 11, 2014
Total Price:
$21.40
AC Spot Welder Controller
author: Graith95
2 layer board of 2.75 x 2.00 inches (70.0 x 50.9 mm)
Uploaded:
June 11, 2014
Shared:
June 11, 2014
Total Price:
$27.55
Controller for an AC spot welder with integrated solid-state relay.
Controller for an AC spot welder with integrated solid-state relay.
WWVB Receiver with LCD
author: goboxgizmos
2 layer board of 3.15 x 1.43 inches (80.0 x 36.2 mm)
Uploaded:
June 11, 2014
Shared:
June 11, 2014
Total Price:
$22.45
N0QBH's PIC based WWVb clock. Uses CMMR-6 60KHz receiver device
N0QBH's PIC based WWVb clock. Uses CMMR-6 60KHz receiver device
USB DigiVOX Interface V2
author: goboxgizmos
2 layer board of 3.97 x 1.68 inches (100.8 x 42.7 mm)
Uploaded:
June 11, 2014
Shared:
June 11, 2014
Total Price:
$33.30
