Wheel lights thing - prototype
author: Kike.
2 layer board of 3.47 x 0.48 inches (88.2 x 12.3 mm)
Uploaded:
September 03, 2014
Shared:
September 03, 2014
Total Price:
$8.35
Yet another one of these thingies that display stuff on a wheel while it spins. uC is C8051F320. A magnetic switch is used to guess the angular rate. The large pads are for a surface mount battery holder. Cheers.
Yet another one of these thingies that display stuff on a wheel while it spins. uC is C8051F320. A magnetic switch is used to guess the angular rate. The large pads are for a surface mount battery holder. Cheers.
OD1+
author: mmolteratx
4 layer board of 2.08 x 1.35 inches (52.7 x 34.3 mm)
Uploaded:
September 02, 2014
Shared:
September 02, 2014
Total Price:
$28.00
Boss OD1 clone with tone control
For stock low end response, change C4 to 47nF
To remove tone control, make C5 18nF and omit C6/TONE
Schematic: https://dl.dropboxusercontent.com/u/8021347/OD1%2B.png
Boss OD1 clone with tone control
For stock low end response, change C4 to 47nF
To remove tone control, make C5 18nF and omit C6/TONE
Schematic: https://dl.dropboxusercontent.com/u/8021347/OD1%2B.png
FONA Data Logger Board
author: chipmc
2 layer board of 2.79 x 2.00 inches (70.8 x 50.8 mm)
Uploaded:
August 24, 2014
Shared:
September 02, 2014
Total Price:
$27.85
Tested - works!
eMail me (address on board) if you need BOM.
Board to simplify Fona sensor testing
Tested - works!
eMail me (address on board) if you need BOM.
Board to simplify Fona sensor testing
BLF_PLATE_26mm
author: Cereal_Killer
2 layer board of 1.04 x 1.04 inches (26.4 x 26.4 mm)
Uploaded:
September 01, 2014
Shared:
September 01, 2014
Total Price:
$5.35
26mm spring plate for TR-j18 / 9xT6 family of lights. $5.35 / set of 3
26mm spring plate for TR-j18 / 9xT6 family of lights. $5.35 / set of 3
ADP422TC v1.6
author: ChibiConsulting
2 layer board of 0.83 x 0.58 inches (21.1 x 14.8 mm)
Uploaded:
August 31, 2014
Shared:
August 31, 2014
Total Price:
$2.40
422 Polarity Checker
422 Polarity Checker
TinySensor Node V0.1
author: arduinopraxis
2 layer board of 1.01 x 1.22 inches (25.6 x 31.0 mm)
Uploaded:
August 06, 2014
Shared:
August 31, 2014
Total Price:
$6.10
Tiny sensor board with ATtiny84 and RFM12B Transceiver.
Tiny sensor board with ATtiny84 and RFM12B Transceiver.
I2C expander with MCP23017
author: dimonic
2 layer board of 1.90 x 0.95 inches (48.2 x 24.2 mm)
Uploaded:
August 22, 2014
Shared:
August 30, 2014
Total Price:
$9.00
Use I2C to drive 16x2 LCD, optional RGB backlight, PWM. Uses SOIC chips for small footprint. All circuit and layout by J Echavarria.
Use I2C to drive 16x2 LCD, optional RGB backlight, PWM. Uses SOIC chips for small footprint. All circuit and layout by J Echavarria.
Discrete S-R Latch
author: ccorn90
2 layer board of 1.30 x 0.99 inches (33.0 x 25.1 mm)
Uploaded:
August 30, 2014
Shared:
August 30, 2014
Total Price:
$6.40
Using x4001 quad NOR gate. Supply voltage up to 18V possible with CD4001BEE4. Open collector outputs.
Using x4001 quad NOR gate. Supply voltage up to 18V possible with CD4001BEE4. Open collector outputs.
BNO055 I2C Breakout w/ Pads
author: TheNumenorean
2 layer board of 0.25 x 0.59 inches (6.4 x 15.0 mm)
Uploaded:
August 29, 2014
Shared:
August 29, 2014
Total Price:
$0.70
Miniaturized Breakout for the BNO055
Miniaturized Breakout for the BNO055