B-15N nodeA V1.2D
author: bax
2 layer board of 1.62 x 2.23 inches (41.0 x 56.5 mm)
Uploaded:
June 28, 2015
Shared:
June 28, 2015
Total Price:
$17.95
Ampeg vintage B-15N nodeA capacitor board. Traces are in parallel on both sides of the board to effectively double the copper thickness.
Can be mounted on the eyelet board with 4-40 machine screws and ½" hex standoffs.
R1, R2 220K flameproof resistors
C1, C2 Nichicon 82uF 450V GW series …
Show full description
Ampeg vintage B-15N nodeA capacitor board. Traces are in parallel on both sides of the board to effectively double the copper thickness.
Can be mounted on the eyelet board with 4-40 machine screws and ½" hex standoffs.
R1, R2 220K flameproof resistors
C1, C2 Nichicon 82uF 450V GW series …
Show full description
SNES-Tap Rev A
author: defparam
2 layer board of 2.17 x 0.62 inches (55.1 x 15.8 mm)
Uploaded:
October 24, 2014
Shared:
June 28, 2015
Total Price:
$6.70
Adaptor board to hook into the SNES expansion port for interfacing an SNES to an FPGA dev board (DE0-Nano)
Adaptor board to hook into the SNES expansion port for interfacing an SNES to an FPGA dev board (DE0-Nano)
SNES-Tap Rev B
author: defparam
2 layer board of 1.89 x 2.13 inches (48.0 x 54.1 mm)
Uploaded:
June 28, 2015
Shared:
June 28, 2015
Total Price:
$20.10
Adaptor/Translator board to hook into the SNES expansion port for interfacing an SNES to an FPGA dev board (DE0-Nano).
Adaptor/Translator board to hook into the SNES expansion port for interfacing an SNES to an FPGA dev board (DE0-Nano).
BTXE5DevR2PTH
author: MrK
2 layer board of 1.22 x 0.81 inches (31.0 x 20.6 mm)
Uploaded:
June 22, 2015
Shared:
June 28, 2015
Total Price:
$4.90
Bluetooth XMEGAE5 Dev board R2 Thru Hole. Use HC06 or similar modules.
Bluetooth XMEGAE5 Dev board R2 Thru Hole. Use HC06 or similar modules.
Dual Voltage Power Supply
author: stevegetsiv
2 layer board of 4.34 x 3.05 inches (110.2 x 77.5 mm)
Uploaded:
June 27, 2015
Shared:
June 27, 2015
Total Price:
$66.10
Non-regulated positive and negative rails along with regulated rails so that you can power both transistors and op amps from one board. See my class A audio amplifier board.
Non-regulated positive and negative rails along with regulated rails so that you can power both transistors and op amps from one board. See my class A audio amplifier board.
Class A Output, Current Source
author: stevegetsiv
2 layer board of 4.34 x 3.45 inches (110.2 x 87.6 mm)
Uploaded:
June 27, 2015
Shared:
June 27, 2015
Total Price:
$74.80
By SG Technology, this class A audio output amplifier uses a differential amplifier input, an op amp VAS and 8 BPJ Transistors in the output stage. Yes, it puts out some serious heat, depending on the bias current as set by the external pot.
By SG Technology, this class A audio output amplifier uses a differential amplifier input, an op amp VAS and 8 BPJ Transistors in the output stage. Yes, it puts out some serious heat, depending on the bias current as set by the external pot.
led12108x8
author: Spacetronomy
2 layer board of 1.97 x 2.56 inches (50.1 x 65.1 mm)
Uploaded:
March 21, 2015
Shared:
June 27, 2015
Total Price:
$25.25
led matrix test technique
led matrix test technique
LED clock
author: Spacetronomy
2 layer board of 1.97 x 1.97 inches (50.1 x 50.1 mm)
Uploaded:
June 01, 2015
Shared:
June 27, 2015
Total Price:
$19.45
a simple led clock with sziklai pair drivers
a simple led clock with sziklai pair drivers
Seven segment LED clock
author: Spacetronomy
2 layer board of 1.97 x 1.97 inches (50.1 x 50.1 mm)
Uploaded:
June 22, 2015
Shared:
June 27, 2015
Total Price:
$19.45
Seven segment clock done with PIC16F628
Seven segment clock done with PIC16F628
Button Board
author: hank_kls65
2 layer board of 3.85 x 3.53 inches (97.7 x 89.7 mm)
Uploaded:
June 27, 2015
Shared:
June 27, 2015
Total Price:
$67.85
25 Position LED Button Board
25 Position LED Button Board
Buckit Bucket
author: metacollin
2 layer board of 0.93 x 0.78 inches (23.5 x 19.7 mm)
Uploaded:
June 27, 2015
Shared:
June 27, 2015
Total Price:
$3.55
Eats 18-60VDC, poops out 12V at 3.5A. Runs on magical kitten breath.
And money. Kitten breath and skrilla. The module is a MAXM17504 they're $30 a pop. There are cheaper solutions than this board.
This is really only if you already had the modules lying around for some reason and nee…
Show full description
Eats 18-60VDC, poops out 12V at 3.5A. Runs on magical kitten breath.
And money. Kitten breath and skrilla. The module is a MAXM17504 they're $30 a pop. There are cheaper solutions than this board.
This is really only if you already had the modules lying around for some reason and nee…
Show full description
