Shared Projects

Shared Projects

ArcadeTV's RGB Bypass Board for the Megadrive/Genesis 2 & 3

author: Helder
Top
Bottom

2 layer board of 1.66 x 1.10 inches (42.2 x 27.9 mm)
Uploaded: July 26, 2015
Shared: July 26, 2015
Total Price: $9.10

Bypass the onboard RGB and outputs clean and voltage perfect RGB

Bypass the onboard RGB and outputs clean and voltage perfect RGB

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ArcadeTV's RGB Bypass Boards for the SMS2

author: Helder
Top
Bottom

2 layer board of 1.58 x 1.58 inches (40.0 x 40.0 mm)
Uploaded: July 25, 2015
Shared: July 25, 2015
Total Price: $12.40

ArcadeTV's RGB Bypass boards for the Sega Master System 2

ArcadeTV's RGB Bypass boards for the Sega Master System 2

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

ARCADETV MD1 & SMS1 RGB BYPASS

author: Helder
Top
Bottom

2 layer board of 1.38 x 1.26 inches (35.0 x 32.0 mm)
Uploaded: July 25, 2015
Shared: July 25, 2015
Total Price: $8.65

ArcadeTV's RGB Bypass boards for the Megadrive 1 aka Genesis Model 1 and the Sega Master System 1

ArcadeTV's RGB Bypass boards for the Megadrive 1 aka Genesis Model 1 and the Sega Master System 1

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Plus3 Video MOD

author: Danjovic
Top
Bottom

2 layer board of 0.55 x 0.61 inches (14.0 x 15.6 mm)
Uploaded: July 25, 2015
Shared: July 25, 2015
Total Price: $1.65

PCB for ZX Spectrum Plus 3 video Mod.

This mod was designed to be installed in ZX Spectrum +3 replacing the +12V line in RGB connector by a Composite Video output. For further information about this MOD refer to [this link](http://www.benophetinternet.nl/hobby/vanmezelf/ZX%20Spectrum%20128K%…

Show full description

PCB for ZX Spectrum Plus 3 video Mod.

This mod was designed to be installed in ZX Spectrum +3 replacing the +12V line in RGB connector by a Composite Video output. For further information about this MOD refer to [this link](http://www.benophetinternet.nl/hobby/vanmezelf/ZX%20Spectrum%20128K%…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

K-Type TC Board

author: swedishhat
Top
Bottom

2 layer board of 0.87 x 1.70 inches (22.1 x 43.1 mm)
Uploaded: July 24, 2015
Shared: July 25, 2015
Total Price: $7.35

MAX31855 K-type thermocouple amplifier board

MAX31855 K-type thermocouple amplifier board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

dc dc nutsack

author: metacollin
Top
Bottom

2 layer board of 1.54 x 1.01 inches (39.1 x 25.7 mm)
Uploaded: July 25, 2015
Shared: July 25, 2015
Total Price: $7.75

awww yisss

awww yisss

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Mini EL Flex Module R0.7

author: FyberLabs
Top
Bottom

2 layer board of 0.81 x 0.71 inches (20.5 x 17.9 mm)
Uploaded: July 25, 2015
Shared: July 25, 2015
Total Price: $2.80

This Flex Module was developed by Fyber Labs Inc..

Buy this board assembled now.

Mini EL project blog.

We are a wearables sta…

Show full description

This Flex Module was developed by Fyber Labs Inc..

Buy this board assembled now.

Mini EL project blog.

We are a wearables sta…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Esp8266-12-Adaptor

author: WA0UWH
Top
Bottom

2 layer board of 0.26 x 0.81 inches (6.5 x 20.5 mm)
Uploaded: July 14, 2015
Shared: July 25, 2015
Total Price: $1.00

Exp8266-Esp12-Adapter with Castellated Pins 2mm on one side with 100mil Header on the other side.

Exp8266-Esp12-Adapter with Castellated Pins 2mm on one side with 100mil Header on the other side.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

PEM

author: vik10
Top
Bottom

2 layer board of 1.50 x 2.50 inches (38.0 x 63.5 mm)
Uploaded: July 25, 2015
Shared: July 25, 2015
Total Price: $18.70

Personal Emissions Monitor, version 2 board design

Personal Emissions Monitor, version 2 board design

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

SerialGamePad

author: ManiacalLabs
Top
Bottom

2 layer board of 1.38 x 1.38 inches (35.1 x 35.1 mm)
Uploaded: June 15, 2015
Shared: July 24, 2015
Total Price: $9.50

SerialGamePad

SerialGamePad

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Power on/low battery indicator

author: Mooper
Top
Bottom

2 layer board of 0.63 x 0.73 inches (15.9 x 18.4 mm)
Uploaded: July 24, 2015
Shared: July 24, 2015
Total Price: $2.25

Based on daftmike's low battery indicator mk2.
Parts list: <http://www.digikey.com/short/t3081n>

SMD LEDs can be soldered directly or other LEDs can be wired to the pads.

Based on daftmike's low battery indicator mk2.
Parts list: <http://www.digikey.com/short/t3081n>

SMD LEDs can be soldered directly or other LEDs can be wired to the pads.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Masthead Sensors

author: AD0CZ
Top
Bottom

2 layer board of 3.14 x 1.15 inches (79.7 x 29.2 mm)
Uploaded: June 13, 2014
Shared: July 24, 2015
Total Price: $18.00

For DC Rotator controller

For DC Rotator controller

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Simple LVDT Launchpad Interface

author: MSU-DudleyD
Top
Bottom

2 layer board of 2.31 x 2.47 inches (58.7 x 62.7 mm)
Uploaded: July 24, 2015
Shared: July 24, 2015
Total Price: $28.50

Simple card to interface the TI Launchpad to an LVDT using an Analog Devices Demodulator device

Simple card to interface the TI Launchpad to an LVDT using an Analog Devices Demodulator device

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

DRV8711

author: GCLA
Top
Bottom

2 layer board of 2.23 x 0.72 inches (56.6 x 18.4 mm)
Uploaded: June 29, 2015
Shared: July 24, 2015
Total Price: $8.05

Texas Instrument DRV8711 step motor driver test board

Texas Instrument DRV8711 step motor driver test board

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

APA106 Breakout V2

author: tuzzio
Top
Bottom

2 layer board of 0.50 x 0.50 inches (12.7 x 12.7 mm)
Uploaded: July 24, 2015
Shared: July 24, 2015
Total Price: $1.25

Second version of a board I will be using to construct large grids of arbitrary shape/size out of APA106 RGB LEDs. The first version used a diamond orientation, and the new version uses a more normal square orientation- now all wire connections in a grid will be the same length. The leads for t…

Show full description

Second version of a board I will be using to construct large grids of arbitrary shape/size out of APA106 RGB LEDs. The first version used a diamond orientation, and the new version uses a more normal square orientation- now all wire connections in a grid will be the same length. The leads for t…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

TinyBuck

author: metacollin
Top
Bottom

2 layer board of 0.68 x 0.36 inches (17.3 x 9.2 mm)
Uploaded: July 24, 2015
Shared: July 24, 2015
Total Price: $1.20

wut

wut

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

MySensor 3.3V Pro Mini or 5V Pro Mini with NRF24L01+ V2.0

author: corysteinmetz
Top
Bottom

2 layer board of 0.74 x 1.52 inches (18.7 x 38.6 mm)
Uploaded: July 02, 2015
Shared: July 24, 2015
Total Price: $5.60

PCB will take 3.3V pro mini or 5V pro mini and connects to NRF24L01+ radio.

Version 2 Fixes

  • fixes some orphaned Ground Planes
  • Replaces the thru-hole resistors with SMD
  • adds power "ports" for various things like rela…

Show full description

PCB will take 3.3V pro mini or 5V pro mini and connects to NRF24L01+ radio.

Version 2 Fixes

  • fixes some orphaned Ground Planes
  • Replaces the thru-hole resistors with SMD
  • adds power "ports" for various things like rela…

Show full description

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

OpenTPM

author: openTPM
Top
Bottom

4 layer board of 1.79 x 0.76 inches (45.4 x 19.4 mm)
Uploaded: July 24, 2015
Shared: July 24, 2015
Total Price: $13.60

OSHW Trusted Platform Module

OSHW Trusted Platform Module

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Ftdi 002

author: BrK
Top
Bottom

2 layer board of 0.66 x 0.92 inches (16.8 x 23.2 mm)
Uploaded: July 05, 2015
Shared: July 24, 2015
Total Price: $3.00

It works.

It works.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project

Voltage regulator

author: BrK
Top
Bottom

2 layer board of 0.89 x 1.42 inches (22.6 x 35.9 mm)
Uploaded: July 06, 2015
Shared: July 24, 2015
Total Price: $6.25

To be used with a SimCOM gsm module. input 5V 2A output 4.2V 2A Tested, works with power form an USB hub.

To be used with a SimCOM gsm module. input 5V 2A output 4.2V 2A Tested, works with power form an USB hub.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy