BLF driver DDm-20 [rev00][tried & tested]
author: DEL
2 layer board of 0.80 x 0.80 inches (20.3 x 20.3 mm)
Uploaded:
January 29, 2017
Shared:
January 29, 2017
Total Price:
$3.20
BLF flashlight driver, 20 mm, DD+m
Features
- 20 mm direct drive + 350 mA regulator LED driver
- No OTC - Intended for e-switch, memory-decay or no-memory firmware.
- R5 to eliminate unintentional Vcc boosting during PWM.
- R3, R4 for stable drive of FET.
- Oversized heat plane for the 7135 with good thermal link to the ground ring.
- Generous 0603 pad sizes that will accept 0805 parts as well.
- Universal package size for MCU. Tiny13-85 fits.
Revision changes
- New
Suggested parts list
- U1: Atmel Attiny25, SSU or SSN package
- U2: 7135 350 mA LED driver
- Q1: Vishay SiR800DP
- C1: 10 uF, X5R or better, 0805
- D1: Schottky diode, 200 mA 20 V or better, 0805 or SOD323
- R1: 22 / 330 kohm, 1%, 0603 (R1, R2 larger values for e-switch lights)
- R2: 4.7 / 100 kohm, 1%, 0603
- R3: 100 kohm, 5%, 0603
- R4: 47 ohm, 5%, 0603
- R5: 4.7 ohm, 5%, 0603
BLF flashlight driver, 20 mm, DD+m
Features
- 20 mm direct drive + 350 mA regulator LED driver
- No OTC - Intended for e-switch, memory-decay or no-memory firmware.
- R5 to eliminate unintentional Vcc boosting during PWM.
- R3, R4 for stable drive of FET.
- Oversized heat plane for the 7135 with good thermal link to the ground ring.
- Generous 0603 pad sizes that will accept 0805 parts as well.
- Universal package size for MCU. Tiny13-85 fits.
Revision changes
- New
Suggested parts list
- U1: Atmel Attiny25, SSU or SSN package
- U2: 7135 350 mA LED driver
- Q1: Vishay SiR800DP
- C1: 10 uF, X5R or better, 0805
- D1: Schottky diode, 200 mA 20 V or better, 0805 or SOD323
- R1: 22 / 330 kohm, 1%, 0603 (R1, R2 larger values for e-switch lights)
- R2: 4.7 / 100 kohm, 1%, 0603
- R3: 100 kohm, 5%, 0603
- R4: 47 ohm, 5%, 0603
- R5: 4.7 ohm, 5%, 0603
