FGPMMOPA6H GPS Breakout v1.1

By Jenner

2 layer board of 1.71 x 1.11 inches (43.4 x 28.1 mm).
Shared on March 14th, 2017 19:21

Basic breakout board for the FGPMMOPA6H GPS module.

To use with a 5V FTDI cable and your computer, orient cable with RESET (green) at pin 1 on J1.

To use with 5V controllers, connect VCC, 5V_RX, 5V_TX, and GND.

To use with 3.3V controllers, connect VCC, 5V_RX, 3.3V_TX, and GND.

The Github repo has the design and parts list.

This project is released under the Open Hardware License v1.2.


FGPMMOPA6H GPS Breakout v1.1

By Jenner

2 layer board of 1.71 x 1.11 inches (43.4 x 28.1 mm).
Shared on March 14th, 2017 19:21

Basic breakout board for the FGPMMOPA6H GPS module.

To use with a 5V FTDI cable and your computer, orient cable with RESET (green) at pin 1 on J1.

To use with 5V controllers, connect VCC, 5V_RX, 5V_TX, and GND.

To use with 3.3V controllers, connect VCC, 5V_RX, 3.3V_TX, and GND.

The Github repo has the design and parts list.

This project is released under the Open Hardware License v1.2.