lume FW3x Aux RGB-LED Board Rev B
author: loneoceanslabs
2 layer board of 0.79 x 0.79 inches (20.0 x 20.1 mm)
Uploaded:
August 21, 2020
Shared:
August 21, 2020
Total Price:
$3.10
Auxiliary RGB LED Board for FW3x Flashlights, designed for 10507/511 or similar Carclo Optics. Six Common-Cathode RGB LEDs wired with R, G, B. In parallel; works with lume1-fw3x LED driver with Anduril.
Rev B is identical to Rev A but improves solder pad spacing for easier wire soldering.
Recommended 0.8mm PCB Thickness, 0402 Resistors, 1615 LEDs. LEDs to use: https://www.aliexpress.com/item/4000748084226.html?spm=a2g0s.9042311.0.0.19424c4dVz9pI6
Recommended Resistors - for my preference 1.8kR for Red and Blue (R1, R3), 5.6kR for Green (R2), size 0402, 1%. For brighter, 220R, 560R, 100R for R, G and B respectively.
The Kingbright APTF1616SEJ3ZGGVBDC LED can also be used but with the caveat that the GREEN and BLUE pins are swapped.
www.loneoceans.com/labs/
Auxiliary RGB LED Board for FW3x Flashlights, designed for 10507/511 or similar Carclo Optics. Six Common-Cathode RGB LEDs wired with R, G, B. In parallel; works with lume1-fw3x LED driver with Anduril.
Rev B is identical to Rev A but improves solder pad spacing for easier wire soldering.
Recommended 0.8mm PCB Thickness, 0402 Resistors, 1615 LEDs. LEDs to use: https://www.aliexpress.com/item/4000748084226.html?spm=a2g0s.9042311.0.0.19424c4dVz9pI6
Recommended Resistors - for my preference 1.8kR for Red and Blue (R1, R3), 5.6kR for Green (R2), size 0402, 1%. For brighter, 220R, 560R, 100R for R, G and B respectively.
The Kingbright APTF1616SEJ3ZGGVBDC LED can also be used but with the caveat that the GREEN and BLUE pins are swapped.
www.loneoceans.com/labs/
