IDE Coupler with UDMA Option

author: Creltek
Top
Bottom

2 layer board of 0.55 x 2.65 inches (14.0 x 67.3 mm)
Uploaded: March 30, 2024
Shared: March 30, 2024
Total Price: $7.25

This board is useful to couple one IDE cable to another (as an extender), or to attach a CompactFlash-to-IDE adapter with a female connection to the end of an IDE cable. There is a jumper that can be used to “force on” UDMA capability; the IDE controller will think an 80-conductor cable is attached when the jumper installed. Note that one IDE pin header has to be installed on the TOP side of the board, and the other header has to be installed on the BOTTOM side of the board.

This board is useful to couple one IDE cable to another (as an extender), or to attach a CompactFlash-to-IDE adapter with a female connection to the end of an IDE cable. There is a jumper that can be used to “force on” UDMA capability; the IDE controller will think an 80-conductor cable is attached when the jumper installed. Note that one IDE pin header has to be installed on the TOP side of the board, and the other header has to be installed on the BOTTOM side of the board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy