SA1toM27C322-100s1 adapter
author: FrankStrasser
2 layer board of 1.47 x 0.79 inches (37.3 x 20.0 mm)
Uploaded:
October 27, 2019
Shared:
October 27, 2019
Total Price:
$5.75
IMPORTANT PLEASE READ this is an adapter to make up to a 4MB sa1 snes game it adapts an m27c322-100s1 eprom to the pcb. Order .8 mil for best fit. Installation: First program the eprom. Then place the eprom inside the adapter as far down as it will go and flush cut the legs. Then solder the adapter to the cart pcb making sure all connections are good before preceding. Last, place the eprom in the adapter and solder the legs in the holes from the top of the adapter. These eproms are hard to find but you can get them by emailing barum electronics sales 09 @ barum electronics . com. To program the eprom, order my adapter on here that adapts the eprom for use with a gq4x.
IMPORTANT PLEASE READ this is an adapter to make up to a 4MB sa1 snes game it adapts an m27c322-100s1 eprom to the pcb. Order .8 mil for best fit. Installation: First program the eprom. Then place the eprom inside the adapter as far down as it will go and flush cut the legs. Then solder the adapter to the cart pcb making sure all connections are good before preceding. Last, place the eprom in the adapter and solder the legs in the holes from the top of the adapter. These eproms are hard to find but you can get them by emailing barum electronics sales 09 @ barum electronics . com. To program the eprom, order my adapter on here that adapts the eprom for use with a gq4x.
