Pogo Pin Size Test

author: JorgeP
Top
Bottom

2 layer board of 0.28 x 0.28 inches (7.0 x 7.0 mm)
Uploaded: September 09, 2024
Shared: September 09, 2024
Total Price: $0.35

Size test for small, 4mm tall, pogo pins with a small pin protrusion on the bottom. Square pad is to test the small pin protrusion on the base and how easy it would be to solder as opposed to a round solder pad.

Larger hole is for testing the size to mount the base of the pogo pin into the board.

Pogo Pins being tested - https://www.amazon.com/Yibuy-Piece-Gold-Plated-Probes/dp/B07FPFBFV3

Size test for small, 4mm tall, pogo pins with a small pin protrusion on the bottom. Square pad is to test the small pin protrusion on the base and how easy it would be to solder as opposed to a round solder pad.

Larger hole is for testing the size to mount the base of the pogo pin into the board.

Pogo Pins being tested - https://www.amazon.com/Yibuy-Piece-Gold-Plated-Probes/dp/B07FPFBFV3

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy