Sega Genesis model 1/Master system model 1 and 2 rgb bypass
author: FrankStrasser
2 layer board of 1.29 x 1.53 inches (32.8 x 38.9 mm)
Uploaded:
February 11, 2019
Shared:
April 16, 2020
Total Price:
$9.85
Order .8 mil or it wont fit!!
Based on models by Voultar, Arcadetv, and DB Electronics with my own spin. To be soldered into the rf spot of a genesis model 1 or master system model 1 or 2 rf spot. Solder capacitor legs through the bottom of the genesis or master system board and through the holes of my board to securely anchor it down. Use front holes(closest to din connector) for genesis and master system 2, back holes for master system 1. Uses a 9 pin din for compatibily with add ons(32x, Sega Cd) and stereo inputs. Also has Hd Retrovision compatibility via a jumper on board. Switch Version uses a S&K OS103011MA7QP1 single pull triple throw slide switch for wiring up fm audio mod
Order .8 mil or it wont fit!!
Based on models by Voultar, Arcadetv, and DB Electronics with my own spin. To be soldered into the rf spot of a genesis model 1 or master system model 1 or 2 rf spot. Solder capacitor legs through the bottom of the genesis or master system board and through the holes of my board to securely anchor it down. Use front holes(closest to din connector) for genesis and master system 2, back holes for master system 1. Uses a 9 pin din for compatibily with add ons(32x, Sega Cd) and stereo inputs. Also has Hd Retrovision compatibility via a jumper on board. Switch Version uses a S&K OS103011MA7QP1 single pull triple throw slide switch for wiring up fm audio mod
