nesramdropin
author: FrankStrasser
2 layer board of 0.79 x 1.61 inches (20.1 x 40.8 mm)
Uploaded:
September 16, 2019
Shared:
September 16, 2019
Total Price:
$6.35
ORDER .8MM OR IT WILL NOT FIT!! ram adapter for making a repro requiring ram like megaman minus infinity for nes with an mmc5 board. Set the ram chip all the way back in the adapter, lift the pins that have vias extending across them and solder them to the extended holes. The white hole designation via is for soldering to pin 47 of a jp mmc5 cart or 56 of a nes cart. Use a cap leg to put through and solder through the holes also do the same for pins 32 and 31.
ORDER .8MM OR IT WILL NOT FIT!! ram adapter for making a repro requiring ram like megaman minus infinity for nes with an mmc5 board. Set the ram chip all the way back in the adapter, lift the pins that have vias extending across them and solder them to the extended holes. The white hole designation via is for soldering to pin 47 of a jp mmc5 cart or 56 of a nes cart. Use a cap leg to put through and solder through the holes also do the same for pins 32 and 31.
