2 layer board of 1.31 x 1.36 inches (33.2 x 34.4 mm)
Uploaded:
October 11th 2017
Shared:
November 8th 2017
Total Price:
$8.80
A breadboard adapter for the GR10J Numicator (Nixie). These tubes have 1mm pins that plug in to a socket. This board …
A breadboard adapter for the GR10J Numicator (Nixie). These tubes have 1mm pins that plug in to a socket. This board is intended to use female D-SUB pins as a ‘socket’. These are often listed on eBay as ‘1mm tube socket pins’.
The board includes pads for a neopixel and for a current limiting resistor (or a jumper if current is limited off-board). Adding the resistor on the board allows you to easily swap different adapter boards in and out without having to worry about changing this resistor.
See my web site for a complete list of all my Nixie tube adapters.
A breadboard adapter for the GR10J Numicator (Nixie). These tubes have 1mm pins that plug in to a socket. This board …
A breadboard adapter for the GR10J Numicator (Nixie). These tubes have 1mm pins that plug in to a socket. This board is intended to use female D-SUB pins as a ‘socket’. These are often listed on eBay as ‘1mm tube socket pins’.
The board includes pads for a neopixel and for a current limiting resistor (or a jumper if current is limited off-board). Adding the resistor on the board allows you to easily swap different adapter boards in and out without having to worry about changing this resistor.
See my web site for a complete list of all my Nixie tube adapters.
Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.
