Pi-OLED-Adapter v1.0
author: CaptainMurdoch
2 layer board of 1.13 x 0.58 inches (28.6 x 14.6 mm)
Uploaded:
February 18, 2019
Shared:
February 27, 2019
Total Price:
$3.20
Adapter board to attach i2c based OLED displays to the Raspberry Pi. Only pins 1,3,5,9 are used on the Pi, others may be left unconnected or a smaller header could be used.
The board is designed to be used with two different OLED pinouts, VCC-GND-SCL-SDA and GND-VCC-SCL-SDA. Select a pinout by creating two solder bridges as noted on the board. Solder bridge between the GND and 1 holes to put GND on pin 1 of the 4-pin header, bridge between GND and 2 to put GND on pin 2. Do the same for VCC.
Adapter board to attach i2c based OLED displays to the Raspberry Pi. Only pins 1,3,5,9 are used on the Pi, others may be left unconnected or a smaller header could be used.
The board is designed to be used with two different OLED pinouts, VCC-GND-SCL-SDA and GND-VCC-SCL-SDA. Select a pinout by creating two solder bridges as noted on the board. Solder bridge between the GND and 1 holes to put GND on pin 1 of the 4-pin header, bridge between GND and 2 to put GND on pin 2. Do the same for VCC.
