Dr Boogey
author: kgullion
2 layer board of 4.06 x 0.89 inches (103.2 x 22.6 mm)
Uploaded:
May 23, 2014
Shared:
January 08, 2015
Total Price:
$18.00
Based on gaussmarkov’s project at http://gaussmarkov.net/wordpress/circuits/dr-boogey/
There are a few extra parts on the board. The extra capacitor C22 and the switch SW1 are for a raw/vintage/modern mod. I used a 470nF cap for C22 and a SPDT center off switch for SW1 but you can leave off C22 and solder all three pads for SW1 together if you want a standard Dr Boogie. The only other ‘extra’ is R21 which goes from lug 1 to lug 3 of the MID pot. That way you can use a 5k audio pot and a 5k resistor for R21 to make a psuedo-linear 2.5k pot. Leave it off if your using a 2k or 2.5k pot.
Based on gaussmarkov’s project at http://gaussmarkov.net/wordpress/circuits/dr-boogey/
There are a few extra parts on the board. The extra capacitor C22 and the switch SW1 are for a raw/vintage/modern mod. I used a 470nF cap for C22 and a SPDT center off switch for SW1 but you can leave off C22 and solder all three pads for SW1 together if you want a standard Dr Boogie. The only other ‘extra’ is R21 which goes from lug 1 to lug 3 of the MID pot. That way you can use a 5k audio pot and a 5k resistor for R21 to make a psuedo-linear 2.5k pot. Leave it off if your using a 2k or 2.5k pot.
