Timelapse Camera Controller

By diycrap

2 layer board of 2.22 x 4.77 inches (56.3 x 121.1 mm).
Shared on November 10th, 2013 19:22

Pan/Tilt/Dolly camera control for timelapse photography. Controls three Easydriver stepper motor drivers from an ATMega328. The camera is controlled via optocouplers. The circuit can also be used for a CNC router.


Timelapse Camera Controller

By diycrap

2 layer board of 2.22 x 4.77 inches (56.3 x 121.1 mm).
Shared on November 10th, 2013 19:22

Pan/Tilt/Dolly camera control for timelapse photography. Controls three Easydriver stepper motor drivers from an ATMega328. The camera is controlled via optocouplers. The circuit can also be used for a CNC router.