Nixie IN-12 board
2 layer board of 3.59 x 2.65 inches (91.1 x 67.3 mm)
Uploaded:
September 12, 2015
Shared:
October 18, 2015
Total Price:
$47.50
Driving four IN-12 Nixie tubes with shift registers. Several boards can be cascaded. Disclaimer. The IN-12s must be mounted on the back side of the board, since the pin out is wrong.
Driving four IN-12 Nixie tubes with shift registers. Several boards can be cascaded. Disclaimer. The IN-12s must be mounted on the back side of the board, since the pin out is wrong.
Timelapse Camera Controller
2 layer board of 2.22 x 4.77 inches (56.3 x 121.1 mm)
Uploaded:
November 10, 2013
Shared:
November 10, 2013
Total Price:
$52.75
Pan/Tilt/Dolly camera control for timelapse photography. Controls three Easydriver stepper motor drivers from an ATMega328. The camera is controlled via optocouplers. The circuit can also be used for a CNC router.
Pan/Tilt/Dolly camera control for timelapse photography. Controls three Easydriver stepper motor drivers from an ATMega328. The camera is controlled via optocouplers. The circuit can also be used for a CNC router.
