RaspNRF24-V2.brd

author: GertSanders
Top
Bottom

2 layer board of 1.40 x 0.75 inches (35.6 x 19.0 mm)
Uploaded: December 29th 2016
Shared: April 13th 2017
Total Price: $5.25

RaspNRF24-V2, tested to work. C1 is 100uF C2 is 10uF C3 is 100nF IC1 is ASM1117 3.3V The NRF24L01 is a module with ceramic antenna. This sits on the top side. The IRQ pin is connected to PIN18 on the Raspberry header. The two row header starts at pin 1 (where JP1 is written) and sits on the bottom side. Fits inside most Raspberry2 cases.

RaspNRF24-V2, tested to work. C1 is 100uF C2 is 10uF C3 is 100nF IC1 is ASM1117 3.3V The NRF24L01 is a module with ceramic antenna. This sits on the top side. The IRQ pin is connected to PIN18 on the Raspberry header. The two row header starts at pin 1 (where JP1 is written) and sits on the bottom side. Fits inside most Raspberry2 cases.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
      Order Board Download Permalink Embed link
Embeddable link to order this shared Project
Whaleshark white