qvgatest_touch

2 layer board of 1.80 x 1.58 inches (45.8 x 40.1 mm).
Shared on October 8th, 2015 11:17

This is the little test board shown here:

http://www.pjrc.com/store/display_ili9341_touch.html

Parts used on the board are:

   1    LM7805 voltage regulator        Digikey LM7805ACT-ND
   1    B130 Schottky diode             Digikey B130-FDICT-ND
   1    140 mA PTC fuse                 Digikey 507-1495-1-ND
   1    100 ohm 1/4 watt resistor       Digikey 100XBK-ND
   2    10K ohm 1/4 watt resistor       Digikey 10.0KXBK-ND
   1    DC power jack                   Mouser 163-7620E-E
   1    0.1uF capacitor                 Digikey BC1084CT-ND

How to use Digikey’s website to find alternate parts when any of these aren’t in stock.