Gun_Hat_Servo_Test_Driver-Ver-2
author: DR2D
2 layer board of 1.61 x 0.74 inches (41.0 x 18.9 mm)
Uploaded:
July 16, 2024
Shared:
July 16, 2024
Total Price:
$6.00
A PCB to generate the PWL signal to control a servo. Ver-2 adds 47uF caps across the PWR and GND output pins to minimize voltage glitches as the servo accelerates. Refer to the XRP_Robot_Gun_Hat model in printables.com for assembly and BOM.
A PCB to generate the PWL signal to control a servo. Ver-2 adds 47uF caps across the PWR and GND output pins to minimize voltage glitches as the servo accelerates. Refer to the XRP_Robot_Gun_Hat model in printables.com for assembly and BOM.
