Gun_Hat_Servo_Test_Driver-Ver-2
2 layer board of 1.61 x 0.74 inches (41.0 x 18.9 mm)
Uploaded:
July 16, 2024
Shared:
July 16, 2024
Total Price:
$6.00
A PCB to generate the PWL signal to control a servo. Ver-2 adds 47uF caps across the PWR and GND output pins to minimize voltage glitches as the servo accelerates. Refer to the XRP_Robot_Gun_Hat model in printables.com for assembly and BOM.
A PCB to generate the PWL signal to control a servo. Ver-2 adds 47uF caps across the PWR and GND output pins to minimize voltage glitches as the servo accelerates. Refer to the XRP_Robot_Gun_Hat model in printables.com for assembly and BOM.
Servo_AUX_Power_Controller-Ver-2
2 layer board of 1.17 x 0.97 inches (29.8 x 24.7 mm)
Uploaded:
July 16, 2024
Shared:
July 16, 2024
Total Price:
$5.70
A PCB to provide a software switched Auxiliary Power Supply for servo motors that may over load the main supply. Ver-2 adds 47uF caps across the PWR and GND output pins to minimize voltage glitches as the servo accelerates. Refer to the "XRP_Robot_Gun_Hat" model in printables.com for assembly an…
Show full description
A PCB to provide a software switched Auxiliary Power Supply for servo motors that may over load the main supply. Ver-2 adds 47uF caps across the PWR and GND output pins to minimize voltage glitches as the servo accelerates. Refer to the "XRP_Robot_Gun_Hat" model in printables.com for assembly an…
Show full description