a simple board to reroute the burst on a snes apu version to get rid of the horrible checkerboard pattern while preserving composite and s video. 0805 packages. Remove r59 r5 and c53 from the bottom of the snes and place them on my board or throw away and use fresh components. r59 is 4.7k r5 is 560 ohm c53 is .1uf. the via on my board is ground to be attached to a ground point on the snes and anchored in place on the motherboard top. Lift pin 3 of ppu2 (my board mistakenly says cpu pin 3) for best results. Any questions message me on twitter frankym2612