Wii HDMI Main Board v0.2
author: Arthrimus
2 layer board of 1.59 x 1.56 inches (40.5 x 39.7 mm)
Uploaded:
April 10, 2019
Shared:
April 10, 2019
Total Price:
$12.40
Layout based on the Shuriken V3 design. Should fit the following Wii Motherboards: RVL-CPU-40 RVL-CPU-50 RVL-CPU-60
There is no IR remote support on this version so the following motherboards without GameCube ports may not be usable: RVK-CPU-01 RVK-CPU-02
BOM C1,C2,C3,C4,C5,C6 | .1uf
C8 | 10uf
C9 | 4.7uf
R3,R4 | 4.7Kohm
R2 | 330Ohm R5 | 180Ohm
R7,R6 | 10Kohm
U1 | XC3S200A-4VQG100C
U3 | TPS74012DGKR
U4 | M25P40-VMN6PB
FFC Connector | 2-1734592-0
Firmware: https://github.com/ikorb/gcvideo/releases
Use the latest Shuriken V3 Wii firmware.
Layout based on the Shuriken V3 design. Should fit the following Wii Motherboards: RVL-CPU-40 RVL-CPU-50 RVL-CPU-60
There is no IR remote support on this version so the following motherboards without GameCube ports may not be usable: RVK-CPU-01 RVK-CPU-02
BOM C1,C2,C3,C4,C5,C6 | .1uf
C8 | 10uf
C9 | 4.7uf
R3,R4 | 4.7Kohm
R2 | 330Ohm R5 | 180Ohm
R7,R6 | 10Kohm
U1 | XC3S200A-4VQG100C
U3 | TPS74012DGKR
U4 | M25P40-VMN6PB
FFC Connector | 2-1734592-0
Firmware: https://github.com/ikorb/gcvideo/releases
Use the latest Shuriken V3 Wii firmware.
