Capcom Classics Interface Adapter
author: Voultar
2 layer board of 4.46 x 1.76 inches (113.2 x 44.7 mm)
Uploaded:
March 12th 2020
Shared:
March 12th 2020
Total Price:
$39.20
The Capcom Classics adapter is to be used for the select number of Capcom arcade titles which use the “Capcom Classics” proprietary arcade pinout. This adapter allow you to seamlessly & safely interface your Capcom arcade PCB’s directly to the Jamma standard with no wiring harness. I’ve designed this to work with both official and “most” bootleg equivalents, but I can not guarantee complete bootleg compatibility.
All supported games can be found on the silk-screen of the adapter.
PCB thickness should be 1.6MM, the edge connector on the JAMMA side should be properly beveled with the contacts being hard gold flashed. However, ENIG may be sufficient for your application. You may use a standard 56P JAMMA connector to solder to the Capcom side of the adapter.
Please see the zip file for license and more information.
The Capcom Classics adapter is to be used for the select number of Capcom arcade titles which use the “Capcom Classics” proprietary arcade pinout. This adapter allow you to seamlessly & safely interface your Capcom arcade PCB’s directly to the Jamma standard with no wiring harness. I’ve designed this to work with both official and “most” bootleg equivalents, but I can not guarantee complete bootleg compatibility.
All supported games can be found on the silk-screen of the adapter.
PCB thickness should be 1.6MM, the edge connector on the JAMMA side should be properly beveled with the contacts being hard gold flashed. However, ENIG may be sufficient for your application. You may use a standard 56P JAMMA connector to solder to the Capcom side of the adapter.
Please see the zip file for license and more information.
