Wearable Plumage - 16 pin side
author: Greys
2 layer board of 0.45 x 2.00 inches (11.5 x 50.8 mm)
Uploaded:
August 16, 2018
Shared:
August 16, 2018
Total Price:
$4.50
Hey
This is half of a thing, here’s the other half
https://oshpark.com/shared_projects/GHpA9odA
Pins available
- Main logic level (3.3V)
- Ground
- Analog pins 0 through 5
Instructions
- Use mounting holes to attach the plumage to the feather, or a wing with the plumage below the parent board. The boards should be touching, and make sure the header holes are reasonably aligned.
- Place a header through the parent board, regular length headers should have the pin extending far enough to attach the plumage.
- Solder the 3 together at each pin, you may want to do the outsides first and work inward.
Hey
This is half of a thing, here’s the other half
https://oshpark.com/shared_projects/GHpA9odA
Pins available
- Main logic level (3.3V)
- Ground
- Analog pins 0 through 5
Instructions
- Use mounting holes to attach the plumage to the feather, or a wing with the plumage below the parent board. The boards should be touching, and make sure the header holes are reasonably aligned.
- Place a header through the parent board, regular length headers should have the pin extending far enough to attach the plumage.
- Solder the 3 together at each pin, you may want to do the outsides first and work inward.
