RasPi RFM69W shield (room for improvement)

author: hannes
Top
Bottom

2 layer board of 1.37 x 1.03 inches (34.9 x 26.2 mm)
Uploaded: February 26, 2016
Shared: March 12, 2016
Total Price: $7.05

A RaspberryPi shield for the RFM69W module.

The shield is functional, but I have some ideas for improvements:

  • pin DIO5 of the RFM69W module should be connected to a different pin on the Raspberry Pi connector
  • the pads for the RFM69W module should could be larger to make it easier to solder the shield by hand
  • the unconnected pin of the RFM69W module should be connected to ground

A RaspberryPi shield for the RFM69W module.

The shield is functional, but I have some ideas for improvements:

  • pin DIO5 of the RFM69W module should be connected to a different pin on the Raspberry Pi connector
  • the pads for the RFM69W module should could be larger to make it easier to solder the shield by hand
  • the unconnected pin of the RFM69W module should be connected to ground
Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy