sensor node V1.0.1 (WIP)
2 layer board of 1.19 x 2.13 inches (30.2 x 54.2 mm)
Uploaded:
April 22nd 2017
Shared:
April 22nd 2017
Total Price:
$12.65
A simple fully integrated sensor node.
I designed the board to get experience with the ARM Cortex M0+ platform.
IMPORTANT: this board has been designed for the 2 oz service; if ordered with the standard 1 oz service, the properties of the antenna will not be as expected
For more deta…
Show full description
A simple fully integrated sensor node.
I designed the board to get experience with the ARM Cortex M0+ platform.
IMPORTANT: this board has been designed for the 2 oz service; if ordered with the standard 1 oz service, the properties of the antenna will not be as expected
For more deta…
Show full description
Bus Pirate Breadboard Connector
2 layer board of 0.71 x 0.61 inches (17.9 x 15.4 mm)
Uploaded:
May 1st 2016
Shared:
May 1st 2016
Total Price:
$2.10
2x5 pin header breadboard connector
For more details see the github page of the project.
2x5 pin header breadboard connector
For more details see the github page of the project.
RasPi RFM69W shield (room for improvement)
2 layer board of 1.37 x 1.03 inches (34.9 x 26.2 mm)
Uploaded:
February 26th 2016
Shared:
March 12th 2016
Total Price:
$7.05
A RaspberryPi shield for the RFM69W module.
The shield is functional, but I have some ideas for improvements:
- pin DIO5 of the RFM69W module should be connected to a different pin on the Raspberry Pi connector
- the pads for the RFM69W module should could be larger to make it easier t…
Show full description
A RaspberryPi shield for the RFM69W module.
The shield is functional, but I have some ideas for improvements:
- pin DIO5 of the RFM69W module should be connected to a different pin on the Raspberry Pi connector
- the pads for the RFM69W module should could be larger to make it easier t…
Show full description
