NESNOCUTBOARD 9 pin mini din version

author: FrankStrasser
Top
Bottom

2 layer board of 0.84 x 0.82 inches (21.2 x 20.7 mm)
Uploaded: January 15, 2019
Shared: January 15, 2019
Total Price: $3.40

Same as my other nes board just uses a 9 pin mini din for compatibility with hd retrovision cables. Requires either a passthrough scart cable with a genesis 2 mini din pinout or removing the capacitors and resistors on the rgb lines of the nes rgb board. Can use hd retrovision cables if cvbs line is wired up.

Same as my other nes board just uses a 9 pin mini din for compatibility with hd retrovision cables. Requires either a passthrough scart cable with a genesis 2 mini din pinout or removing the capacitors and resistors on the rgb lines of the nes rgb board. Can use hd retrovision cables if cvbs line is wired up.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy