nfcwchsao.kicad_pcb

author: gsteiert
Top
Bottom

2 layer board of 1.35 x 1.90 inches (34.3 x 48.3 mm)
Uploaded: January 01, 2024
Shared: May 13, 2024
Total Price: $12.80

Beeping Blinking Badge Buddy This board has an engergy harvesting NFC EEPROM and WCH CH32V003 MCU.
The MCU is connected to an RGB LED and piezo buzzer. The two ICs are 8 pin SOIC, and the passives are 0603 so it is not too dificult to hand assemble, except for the RGB LED that is a little fine pitch, but the pads are extended and the close pins are shorted together anyway so it is not too difficult.

Beeping Blinking Badge Buddy This board has an engergy harvesting NFC EEPROM and WCH CH32V003 MCU.
The MCU is connected to an RGB LED and piezo buzzer. The two ICs are 8 pin SOIC, and the passives are 0603 so it is not too dificult to hand assemble, except for the RGB LED that is a little fine pitch, but the pads are extended and the close pins are shorted together anyway so it is not too difficult.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy