V4B Power Supply V1.6
author: bax
2 layer board of 4.18 x 3.38 inches (106.1 x 85.8 mm)
Uploaded:
May 26, 2016
Shared:
June 09, 2016
Total Price:
$70.50
Ampeg 70’s V4B vintage power supply, nodes A, B, C, D, and E.
This is a general purpose design that allows two options for connecting node B. R55 spacing allows for one 10W 470Ω resistor or two parallel 5W 1KΩ resistors, one on the top of the board, the other on the bottom.
Sized for Nichicon GW and GX series snap-in capacitors.
Mounted with 4-40 screws on one inch hex standoffs. Uses the four existing cap can mounting holes so the chassis does not have to be modified.
Ampeg 70’s V4B vintage power supply, nodes A, B, C, D, and E.
This is a general purpose design that allows two options for connecting node B. R55 spacing allows for one 10W 470Ω resistor or two parallel 5W 1KΩ resistors, one on the top of the board, the other on the bottom.
Sized for Nichicon GW and GX series snap-in capacitors.
Mounted with 4-40 screws on one inch hex standoffs. Uses the four existing cap can mounting holes so the chassis does not have to be modified.
