Nixie IN-12 board

By diycrap

2 layer board of 3.59 x 2.65 inches (91.1 x 67.3 mm).
Shared on October 18th, 2015 19:52

Driving four IN-12 Nixie tubes with shift registers. Several boards can be cascaded. Disclaimer. The IN-12s must be mounted on the back side of the board, since the pin out is wrong.


Nixie IN-12 board

By diycrap

2 layer board of 3.59 x 2.65 inches (91.1 x 67.3 mm).
Shared on October 18th, 2015 19:52

Driving four IN-12 Nixie tubes with shift registers. Several boards can be cascaded. Disclaimer. The IN-12s must be mounted on the back side of the board, since the pin out is wrong.