LIS3DH breakout board
author: judge2005
2 layer board of 0.76 x 0.56 inches (19.2 x 14.1 mm)
Uploaded:
June 21, 2017
Shared:
July 05, 2017
Total Price:
$2.05
A breadboard adapter for the LIS3DH acceleromter. Pulls out the ADC pins. Can use I2C or SPI to communicate with it (pull CS pin high or low respecitively).
Be aware that you will need to reflow solder the chip. This is primarily why I made this - I need to use this chip as part of a larger project, so I wanted something useful that I could experiment with reflow. I used a reflow skillet, and what do you know - it worked.
A breadboard adapter for the LIS3DH acceleromter. Pulls out the ADC pins. Can use I2C or SPI to communicate with it (pull CS pin high or low respecitively).
Be aware that you will need to reflow solder the chip. This is primarily why I made this - I need to use this chip as part of a larger project, so I wanted something useful that I could experiment with reflow. I used a reflow skillet, and what do you know - it worked.
