K9 MEGA SHIELD v0.02 BETA
author: spurgco
2 layer board of 4.09 x 2.15 inches (103.8 x 54.6 mm)
Uploaded:
February 12, 2019
Shared:
February 24, 2019
Total Price:
$43.90
Arduino MEGA ADK Shield for use with Adafruit i2c 16ch Servo Controller (product #815) and Adafruit Sound Trigger (product# 2341). Intended for use with SHADOW controller system as documented on Astromech.net. NOTES: The reference 5V header is actually connected, and can supply voltage, though it is intended to give you a visual que as to the orientation of the Servo board (along with the dummy capacitor symbol). Board CAN be powered externally, rather than the barrel jack connection, though again IDK why you would do that. Stackable headers can be used to extend the Servo Boards on top of each other. The Sound Trigger will not interrupt a playing track, so I ran a signal to the reset button. This can be mapped in the SHADOW code, or to a physical button depending on the jumper setting of RST_ENABLE. Pins 1-2 enable header, and pins 2-3 connect Pin 11 on the MEGA.
Arduino MEGA ADK Shield for use with Adafruit i2c 16ch Servo Controller (product #815) and Adafruit Sound Trigger (product# 2341). Intended for use with SHADOW controller system as documented on Astromech.net. NOTES: The reference 5V header is actually connected, and can supply voltage, though it is intended to give you a visual que as to the orientation of the Servo board (along with the dummy capacitor symbol). Board CAN be powered externally, rather than the barrel jack connection, though again IDK why you would do that. Stackable headers can be used to extend the Servo Boards on top of each other. The Sound Trigger will not interrupt a playing track, so I ran a signal to the reset button. This can be mapped in the SHADOW code, or to a physical button depending on the jumper setting of RST_ENABLE. Pins 1-2 enable header, and pins 2-3 connect Pin 11 on the MEGA.
