Genesis 1 CXA1145 to CXA2075 v1.4

author: manadream
Top
Bottom

2 layer board of 0.65 x 1.19 inches (16.4 x 30.3 mm)
Uploaded: January 05, 2025
Shared: January 05, 2025
Total Price: $3.85

An adapter board for swapping a CXA1145 encoder with a CXA2075 encoder (intended for a Sega Genesis model 1). Requires a 3.32KOhms 1% resistor, two 75Ohm resistors, two 220uF capacitors, and two 220Ohm resistors, plus the CXA2075. You can get S-Video from the C and Y pads on the board.

An adapter board for swapping a CXA1145 encoder with a CXA2075 encoder (intended for a Sega Genesis model 1). Requires a 3.32KOhms 1% resistor, two 75Ohm resistors, two 220uF capacitors, and two 220Ohm resistors, plus the CXA2075. You can get S-Video from the C and Y pads on the board.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy