Shared Projects by manadream

Shared Projects by manadream

NESRGB EXP Audio Helper

2 layer board of 0.78 x 0.25 inches (19.8 x 6.4 mm)
Uploaded: April 23, 2025
Shared: April 23, 2025
Total Price: $0.95

Use this board to route expansion audio to the NESRGB board for a front-loader NES.

Use this board to route expansion audio to the NESRGB board for a front-loader NES.

Embeddable link to order this shared Project

NES 2-Wire CIC Bypass

2 layer board of 0.40 x 0.84 inches (10.2 x 21.3 mm)
Uploaded: April 23, 2025
Shared: April 23, 2025
Total Price: $1.65

Use this board to implement the 2-Wire CIC Bypass described here. Don't forget to replace C8 with a 220nF or greater cap.

Use this board to implement the 2-Wire CIC Bypass described here. Don't forget to replace C8 with a 220nF or greater cap.

Embeddable link to order this shared Project

Genesis 1 CXA1145 to CXA2075 v1.4

2 layer board of 0.65 x 1.19 inches (16.4 x 30.3 mm)
Uploaded: January 05, 2025
Shared: January 05, 2025
Total Price: $3.85

An adapter board for swapping a CXA1145 encoder with a CXA2075 encoder (intended for a Sega Genesis model 1). Requires a 3.32KOhms 1% resistor, two 75Ohm resistors, two 220uF capacitors, and two 220Ohm resistors, plus the CXA2075. You can get S-Video from the C and Y pads on the board.

An adapter board for swapping a CXA1145 encoder with a CXA2075 encoder (intended for a Sega Genesis model 1). Requires a 3.32KOhms 1% resistor, two 75Ohm resistors, two 220uF capacitors, and two 220Ohm resistors, plus the CXA2075. You can get S-Video from the C and Y pads on the board.

Embeddable link to order this shared Project

CXA1145 to CXA2075 v1.2

2 layer board of 0.65 x 1.19 inches (16.4 x 30.3 mm)
Uploaded: December 25, 2024
Shared: January 05, 2025
Total Price: $3.85

An adapter board for swapping a CXA1145 encoder with a CXA2075 encoder (intended for a Sega Genesis model 1). Requires a 3.32KOhms 1% resistor, two 75Ohm resistors and two 220uF capacitors, plus the CXA2075. You can get S-Video from the C and Y pads on the board. You may need to add resistors to …

Show full description

An adapter board for swapping a CXA1145 encoder with a CXA2075 encoder (intended for a Sega Genesis model 1). Requires a 3.32KOhms 1% resistor, two 75Ohm resistors and two 220uF capacitors, plus the CXA2075. You can get S-Video from the C and Y pads on the board. You may need to add resistors to …

Show full description

Embeddable link to order this shared Project