Rotary Encoder Breakout (with optional pullups)
author: jazzychad
2 layer board of 0.70 x 0.85 inches (17.8 x 21.6 mm)
Uploaded:
June 06, 2017
Shared:
June 06, 2017
Total Price:
$2.95
Rotary Encoder Breakout board with optional pullup resistors.
This breakout board makes it easy to add a rotary encoder to a breadboard or panel-mounted project. If you are using something like an arduino or other mcu with internal pullup resistors to connect the A and B pins, then you don’t need to use the pullup resistors nor the VCC pin on the breakout board.
If you do use the pullup resistors, make sure to connect the VCC pin as well, or the resistors will have no effect.
Rotary Encoder Breakout board with optional pullup resistors.
This breakout board makes it easy to add a rotary encoder to a breadboard or panel-mounted project. If you are using something like an arduino or other mcu with internal pullup resistors to connect the A and B pins, then you don’t need to use the pullup resistors nor the VCC pin on the breakout board.
If you do use the pullup resistors, make sure to connect the VCC pin as well, or the resistors will have no effect.
