BLF switch board DDm-K2-SW [rev01][tried and tested]
author: DEL
2 layer board of 0.61 x 0.57 inches (15.4 x 14.4 mm)
Uploaded:
June 02, 2017
Shared:
June 17, 2017
Total Price:
$1.70
Daughter board for the DDm-K2 driver board.
https://oshpark.com/shared_projects/F9jb3vFP
The switch is a NO SMD 6.2x6.2x3.1 mm tactile type. The LEDs have 0805 footprints. Normally R1 is not populated. A jumper or small-value resistor here wires the two LEDs to be driven in parallel.
Daughter board for the DDm-K2 driver board.
https://oshpark.com/shared_projects/F9jb3vFP
The switch is a NO SMD 6.2x6.2x3.1 mm tactile type. The LEDs have 0805 footprints. Normally R1 is not populated. A jumper or small-value resistor here wires the two LEDs to be driven in parallel.
